Steeda Chassis Jacking Rails Ultra Lite Low-Profile Pair Focus 2012-2018
- Provides More Jacking Points
- Prevents Damage To Pinch Welds
- Wrinkle Black Powder Coat
- Made In The USA
Pair of Steeda Ultra Lite Low-Profile Chassis Jacking Rails for all 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Focuses, 2013, 2014, 2015, 2016, 2017 and 2018 Focus STs and 2016, 2017 and 2018 Focus RSs.
If your 2012-2018 Focus spends a lot of time being jacked up to swap out wheels or for continually installing new parts, the underside of the car can take some abuse over time from the jacks and even lifts. Well, not anymore with this Pair of Steeda Ultra Lite Low-Profile Chassis Jacking Rails from CJ Pony Parts!
Steeda Chassis Jacking Rails 555-5208 Features:
- Comes as a pair for both sides of your focus
- Allows you to jack up your focus anywhere along the jacking rail
- Prevents damage to factory pinch welds
- Wrinkle black powder-coated finish
- Open mounting bracket design prevents water build up
- Includes all necessary mounting hardware
Steeda has designed these Chassis Jacking Rails to be as lightweight as possible, yet durable enough to protect the underside of your rockers. They allow you to jack up your Focus anywhere along the jacking rail without causing damage to the factory pinch welds. These jacking rails are made from the same material used to keep Fox Mustangs from flexing, and feature CAD-designed, laser cut steel brackets and robust 2” x 1” steel tubing. Making the rails even more durable is a wrinkle black powder-coated finish that also helps them keep a low profile appearance and blend in with the underside of your Focus. Included is all the necessary hardware that you will need to bolt the rails on your focus using factory mounting holes, meaning they can also be removed at any time.
- 2012-2018 Focus Sedan and Hatchback
- 2013-2018 Focus ST
- 2016-2018 Focus RS
As you look to upgrade the performance of your Focus, there are lots of brands you could get your new parts from. However, few brands give you the exceptional quality that you can expect from a company like Steeda. CJ Pony Parts offers a variety of parts from Steeda, who is one of the leading manufacturers of performance parts for your Focus.
Order this Pair of Steeda 555-5208 Ultra Lite Low-Profile Chassis Jacking Rails for your 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Focus, 2013, 2014, 2015, 2016, 2017 or 2018 Focus ST or 2016, 2017 or 2018 Focus RS from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Novice skill is required for this installation.
Like I mentioned, these will install in factory holes on your Focus and all this is our hardware for installation is included by Steeda. For this installation need a lift or a jack and jack stands, 3/8" ratchet, 10mm socket, 13mm socket, 15mm socket, 16mm socket and a short extension. The first thing you want to do is get the car up off the ground. Now a drive on lift is going to be ideal. If you don't have that, what you want to do is the factory jack rail location on the pinch weld, be on the outside edge of that and then in the front the factory location won't work, you have to move to the inside here. There's another body weld that will support the car. Once it's jacked up we're going to begin by removing these panels. To remove these panels there's one bolt way up inside here, one on the edge and one in the front. Once the bolts are out there's little clips holding the panel in. You just give it a good tug and it'll pop right off.
When the plastic panel's removed in the back the next thing you're going to do is remove just the four bolts off this front brace. The middle studs can stay, we're just removing the outside bolts on either side. Before you can put the jack rail into place you have to grab this offset stud, put it up through this hole, and sort of get it even in there so it's pulling evenly on the chassis. Now we can put the jacking rail into place. The jacking rail is held into place by two pieces of hardware in the front. One is that offset stud goes here and this hole lines up with the factory brace and the factory hardware. We're just going to leave them loose for now. For the rear what you're going to do is take this flag nut, put it through this hole, then line it up with that factory hole, the supplied hardware, and thread it in. Now go back and tighten everything up starting in the front working our way back.
The last step on this side, we're going to reinstall these panels. This is optional but they fit so no reason not to put them back on. Now you want to repeat the process on the other side. Once both jacking rails are installed now the last step is to reinstall these two bolts on the brace and your installation is finished. The Steeda jacking rails make a nice addition to your ST or RS and they're very easy to install. The nice thing is now once these are installed you can put your jack anywhere along this outside edge and lift the car up. Best of all you can put it in the middle and lift the whole side of the car up with only one placement of the jack. The installation is pretty straightforward, take you around an hour and be back on the road in no time.