Steeda Drag Racing K-Member DOM Steel Lightweight Front Mustang GT 2015-2024/ GT350/ GT350R 2015-2020/ GT500 2020-2022



  • Proudly Made in the USA!
  • For Drag Racing Applications
  • Mandrel Bent DOM Steel
  • 25 lbs Lighter Than Stock
MSRP $1,499.95
You save $44.96

Steeda Lightweight DOM Steel Front Drag Racing K-Member for 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and 2024 GT Mustangs, for 2015, 2016, 2017 2018, 2019 and 2020 Shelby GT350 and GT350R Mustangs, and for 2020, 2021 and 2022 Shelby GT500 Mustangs.

If you own a 2015-2024 GT Mustang, a 2015-2020 GT350 or GT350R Mustang, or a 2020-2022 GT500 Mustang that you frequently use as a drag racing application, then stay on this page! If you don’t already have one, then you need to consider adding this Steeda Lightweight DOM Steel Front Drag Racing K-Member (555-5060) from CJ Pony Parts to your Mustang today!

Features and Benefits:
- Designed for drag race applications
- Weighs only 36lbs, is 25lbs lighter than the stock K-Member
- Bolt-In design does not require any modifications
- Utilizes all factory mounting locations for strength and rigidity
- Incorporated tie-down loops for easy use when trailering
- Includes option to retain front sway bar
- Developed and used on Steeda’s World Record-Setting S550 Mustang
- Extra clearance for long tube headers and has tabs for Helion Turbo Kits
- Boxed and gusseted tension link and lateral link mounts for ultimate strength
- Adjustable roll center and wheelbase for better aerodynamics
- Provision and tabs for Hellion turbo kit
- Made in the USA

Lighten the load and hug the road! This Lightweight DOM Steel Front Drag Racing K-Member (555-5060) produced by Steeda is the perfect option if you want to decrease the weight of your Mustang’s nose for better handling. Compared to the 61-pound OE K-member, this 36-pound K-member will shed 25 pounds of your Mustang’s weight. Its mandrel bent DOM steel construction features a powder-coated finished plus boxed and gusseted tension link and lateral link mounts, all of which contribute to strength and durability.

This K-Member (555-5060) by Steeda provides additional adjustment for roll center correction on lowered cars that are used for drag racing. Your Mustang will also gain clearance for headers and oil pans. It also includes welded tie-down loops for towing trailers to the track. This K-member conveniently retains all factory mounting locations for OEM suspension and steering components, in addition to the factory front sway bar and engine mounts.

Torque Specifications:
- Front Control Arms to Subframe (Inboard): 185 ft-lbs.
- K-Member to Chassis: 85 ft-lbs. (Rear bolts and washers included)
- Sway Bar and Engine mounts: 55 ft-lbs.
- Steering Rack bolts: 150 ft-lbs.

*Recheck all torque values after each track day.
*Thread locker is strongly recommended.

Vehicle Fitment:
- 2015-2024 GT Mustang
- 2015-2020 Shelby GT350 Mustang
- 2015-2020 Shelby GT350R Mustang
- 2020-2022 Shelby GT500 Mustang

Please Note: Although this K-member (555-5060) is compatible with the factory components, the Steeda Bump Steer kit (P/N: BSK4) and their Adjustable Heavy Duty Motor Mount Kit (P/N: MM4039) are both recommended to accompany installation of this K-member.

Tech Tip 1: Installing this K-member may require professional assistance. Please ensure all safety measures are taken into consideration during every step of the installation process.
Tech Tip 2: If you prefer Road Racing, Steeda has a similar version of this K-member just for you, please see P/N: KM34.

*This K-member is designed for off-road competition use only and is not covered under any warranty stated or implied.
*If you choose to reinstall the factory front lower splash shield, simply use cable/zip tie straps (NOT INCLUDED) to secure it in place as there are no provisions to reuse the original installation hardware.

California Residents: Proposition 65 Warning

Related Categories: Mustang Parts, Mustang Suspension, Mustang K-Members

Installation Difficulty


Advanced skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Complete Your Package
Add to Cart