Steeda Rear Lower Control Arm Bearing Kit Spherical With Tool Mustang 2015-2024
- Reduces Wheel Hop
- Teflon Lined Bearings
- Removes Bind In Suspension
- More Predictable Handling
Steeda Spherical Rear Lower Control Arm Bearing Kit with a Tool for all 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and 2024 Mustangs.
Improve your 2015-2024 Mustang's chassis responsiveness and handling with Steeda's all-new Spherical Rear Lower Control Arm Bearing Kit from CJ Pony Parts! The soft rubber bushings straight from factory are not exactly ideal for putting all of your S550 Mustang's power to the ground. Upon heavy acceleration, the standard bushings deflect causing many handling issues. Testing has shown that the factory bushings deflect so much that they can toe the rear tires inward over 2 degrees upon acceleration.
These Spherical Rear Lower Control Arm Bearings from Steeda eliminate the deflection from the factory bushings that can cause numerous negative handling effects. When drag racing, it is important to make sure you can hook up your tires, ridding your suspension of deflection and preventing to much negative toe on launch will ensure you are getting the traction you need upon hard acceleration to get off the line as quick as possible. Reduced wheel hop, increased chassis responsiveness, and understeer correction are also all major improvements to the performance of your S550 Mustang's suspension after installing this bearing kit.
Features and Benefits:
- Reduces amount of deflection
- Reduced wheel hop during hard acceleration
- No noise, vibration, harshness (NVH) increase
- Eliminates alignment change under power
- Decreases vehicle reaction times
- More predictable handling
- Removes bind in the suspension allowing it to move more freely
- Made from 1018-steel with a nickel-plated finish to prevent corrosion
- Bearings are Teflon-lined for smooth operation
- Billet aluminum installation tool included
High precision Teflon-lining of the bearings allow for a smooth operation of your rear suspension and helps to prevent bind. This increases the bearings life and decreases the likelihood of having to replace them. Steeda constructs their Rear Lower Control Arm Spherical Bearings from 1018-steel and are nickel-plated to help protect against corrosion. These spherical bearings have been designed so they will not increase NVH, so your 2015-2024 Mustang can have improved suspension performance while maintaining the factory ride quality.
California Residents: Proposition 65 Warning
Intermediate skill is required for this installation.