Strut Tower Cap Cover Kit Billet Satin Mustang 2005-2010

CJ's Part Number:
HW2148
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 158.28ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Highlights

  • Billet Satin Finish
  • Complete Kit
  • Billet Aluminum Construction
  • Easy Installation
MSRP $107.99
$102.99
You save $5.00

Satin Billet Strut Tower Cap Cover Kit for all 2005, 2006, 2007, 2008, 2009 and 2010 Mustangs.

This 10-piece Billet Strut Tower Cap Cover Kit seals the top of both struts and the nuts surrounding them on both sides of your 2005-2010 Mustang. These covers are precisely made from 6061 billet aluminum for a snug fit and feature a stylish satin finished.

So whether you need to cover the ugly, factory strut tower bolts and nuts, or are looking to improve the overall appearance underneath the hood, look no further than this 10-piece Billet Strut Tower Cap Cover Kit that includes eight smaller strut bolt caps and two larger center caps for the struts.

Features and Benefits:
- Complete 10-Piece Kit
- Billet Aluminum Construction
- Improved Appearance

*This kit does NOT work with strut tower braces.

Tech Tip: In 2010, Ford started putting strut tower braces on from the factory. The strut tower braces attach to the car using the two inner studs on the strut mounts. To make sure that the inner studs still had enough thread engagement for the strut mount nuts when combined with a strut tower brace, Ford started using taller studs. The taller studs will not allow the nut covers to thread down low enough on the studs to sit flush, they will leave a 1/8" gap to the top of the shock tower.

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

We're here with a billet strut tower cap kit fitting all 2005 through 2010 Mustangs. This 10-piece billet strut nut kit comes in a satin finish, and is designed to fit your 2005 through 2010 Mustang. All five pieces are going to thread onto the factory strut nut and strut mounting hardware. The strut cap kit will fit all factory struts and most aftermarket struts as well, but it will not work with a strut tower brace.

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 20.52ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

I know these cover will not work with a Strut Brace. Is that all Braces because some come with 2 hole to attach and some with 4 holes. This is for a 2005 GT

Asked by: MJ Pony
That would be all braces.
Answered by: rk cjpp
Date published: 2020-07-08

Is this gonna fit in 2007 gt500?thansk

Asked by: Mikeg78
Yes, as long as you do not have a strut tower brace.
Answered by: CJPP Dave
Date published: 2018-04-30

Will this  kit fit a 2013 v6 coupe

Asked by: papas1
No it will not.
Answered by: rk cjpp
Date published: 2017-01-23
  • y_2020, m_7, d_13, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_HW2148, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 225.91ms
  • QUESTIONS, PRODUCT