TMI Upholstery High-Back Standard Seat Mustang 1981-1984
TMI High-Back Standard Seat Upholstery for 1981, 1982, 1983, and 1984 Mustangs.
Due to long-term use, fading, wear & tear, it's likely that the upholstery in your 1981-1984 Mustang is in need of a restoration. Replace that old upholstery with a reinvigorated style by purchasing this High-Back Standard Seat Upholstery from TMI. Designed specifically for your Mustang's high-back seats, this upholstery is a premium quality replacement that will easily install into place.
When you make this purchase, you'll be able to choose from a variety of options. First you'll be able to choose whether you want upholstery for your front buckets or a full set for your Coupe or Hatchback. The full sets will include upholstery for your front buckets as well as the bench seat in your rear. You will then choose whether you want a cloth or vinyl material. The cloth upholstery uses a tweed cloth center with vinyl sides and bolsters, while the vinyl upholstery is all vinyl.
Finally you'll be able to choose the color finish of your upholstery from a variety of factory color options. While each option will fit with all 1981-1984 high-back seats, the color options that are associated with specific model years are indicated by having the model year(s) in parenthesis following the color name.
Features & Benefits:
- Premium Quality Replacement
- Direct OE Fitment
- Offered in Multiple Factory Color Options
- Choice of Cloth or Vinyl Material
- OE-Style Precision Upholstery Stitching Pattern
- Strong & Durable Upgrade
- Re-Uses Original Seat Frames
- Made in the USA
This standard seat upholstery for Fox Body's high-back seats is a premium quality replacement that has a convenient OE fitment within your interior. Easily installed into place, this upholstery will even re-use your original seat frames. TMI crafts this upholstery using an OE-style precision stitching pattern for a more strong and durable performance. Completely made in the USA, this upholstery will be a welcome modification to your Fox Body's interior.
*The 1984 Hatchback full set upholstery will ONLY fit with the original 50/50 rear fold down seat.
Please Note: When purchasing front bucket seat upholstery only, you must keep in mind that these new upholstery sets might not be an exact color match to your original rear seat because of fading or the rear set coming from another manufacturer. Due to this factor, CJ Pony Parts always recommends purchasing a full set of upholstery so you can replace the front & rear seats together.
If you are looking to modify or replace interior parts for your Mustang, TMI should be the first brand name to come to mind. TMI Products has been an industry leader for over 30 years with supreme-quality upholstery, door panels, consoles, seat foam and many other Mustang interior products. Each product features special attention being made to upholding the highest quality & using the best possibly materials.
So purchase this TMI High-Back Standard Seat Upholstery for your 1981, 1982, 1983 or 1984 Mustang from CJ Pony Parts today!
Related Categories: Mustang Parts, Mustang Interior, Mustang Upholstery
Installation Difficulty
Intermediate skill is required for this installation.
Installation Videos
Video Transcript
Waylon: Thanks for having me Bill.
Bill: I'm sure that you get this a lot, but what does TMI stand for?
Waylon: TMI was founded in 1982 by four brothers whose last name is Tuccinardi. You get Tuccinardi Manufacturing Incorporated.
Bill: How did you get in to the Mustang market?
Waylon: Originally we started doing Volkswagen interiors, but we quickly saw the market demand for high-quality premium Mustang upholstery and so we have been doing that now for about 25 years.
Bill: Where do you manufacture your products?
Waylon: We manufacture in Corona, California, where we have about 140,000 square feet and nearly 200 employees who do 100% of our manufacturing right here in the U.S.A.
Bill: I hear that you have some new products for us today?
Waylon: I sure do. Do you want to take a look?
Bill: Sounds good. If your Mustang is your daily driver, wear and tear is going to be inevitable. One of the first places that you will start seeing wear is on the seats. From getting in and out constantly, both the upper and lower bolsters will wear thin and eventually rip. Thankfully TMI has a solution for your late model Mustang.
Waylon: Yes. At TMI we manufacture upholstery for every year of the Mustang from '79 all the way up to 2007; covering every LX, every GT, and more recently we have moved in to the special production options of the Bullitt, Mach 1, and the '03, '04 Cobras. We have really begun to specialize in those rare-option seats. One thing that not everybody knows is that the seat that you are leaning on is a '99 to '04. Any one of those frames from a V6 or a GT, if it is worn out and you are looking to replace it, it can easily be upgraded to a seat like this '01 Bullitt here. It is the same frame and it is the same metal work. All you need is new foam and upholstery to turn that raggedy seat in to a high-performance bucket.
Bill: You are telling me that I can take a stock seat like this, a real basic boring seat, and make it in to a Mach 1, Bullitt, '03 Cobra.
Waylon: Yes, absolutely. If you want, I can show you right now. It is really that simple.
Bill: Sure.
Waylon: Headrest goes.
Bill: Okay.
Waylon: You want to grab that side? Just strip that off and get down to the bare metal. I happen to have this as your '03-'04 Cobra foam that I will slip over the top. Essentially, that is it. You can tell that it is the same size seat and the same size frame with new upholstery over the top of that. You just turned a raggedy beat up V6 cloth seat in to a high-performance bucket. It really is that simple.
Installation Guides
-
TMI Seat Foam Standard Seats High Back Pair Mustang 1981-1984$417.99 MSRP $539.98 -
