Total Control Products Coilover Rear Suspension Kit With G-Link Adjustable Lower Control Arms Mustang 1971-1973
Highlights
- Adj. Rear Coilover System
- G-Link 4 Link Rear Suspension
- Double Adjustable Shocks
- Improves Suspension Perf.
Total Control Products Coilover Rear Suspension Kit with G-Link Adjustable Lower Control Arms for 1971, 1972 and 1973 Mustangs.
Are you looking to replace your original leaf springs and replace them with a performance four link system? If so you might want to check out this Rear Coilover Suspension Kit from Total Control Products. This rear four link suspension kit uses the same mounting points as the leaf springs but uses high strength bolts and nuts.
Kits Includes:
- Rear Subframe Cradle
- Double Adjustable G-Link Upper Control Arms
- Single Adjustable G-Link Lower Control Arms
- Single Adjustable VariShock Coilovers
- 200lb. Rear Spring Rate
- Mounting Hardware
Features and Benefits:
- Modern Four Link Suspension Setup
- Improves Ride Quality and Performance
- Added Room For Larger Exhaust
- Adjustable Control Arms
- Single Adjustable Coilovers
- Easy to Read Instructions
Please Note: Some welding is required when you install this suspension kit on your Mustang. This Rear Suspension Kit does not include the Rear Axle Housing.
The G-Link system from Total Control Products feature a four link setup with VariShocks that bolt to Total Control Products FAB9 housings or factory 8" or 9" Ford rear ends with an axle tube size of 2-13/16". The upper and lower control arms can be adjusted to help with pinion angle as well as dial in the rear suspension for different driving styles. Total Control Products coilovers have multiple upper and lower bolt positions for ride height adjustment and the ability to increase stiffness for improved cornering or a softer ride without changing springs.
The upper and lower adjustable control arms have pivot ball mechanisms on either end which provide the ultimate performance for the street or track. The pivot ball links provide a stiff suspension setup that prevents wheel hop and allows the power to the ground. The upper control arms feature a Billet Alloy Steel Rod End that has a massive 7/8” shank. The upper control arms are constructed from billet alloy steel and clear zinc coated for corrosion resistance while the lower control arms are powder coated black. Total Control Products installs zerk fittings on either end of the lower and upper control arms, this allows the bearings and bushings to be greased when needed.
The Coilover system in this kit features a single adjustable shock that can adjust the rebound and compression simultaneously. An adjustable knob on the bottom of the shock body allows the owner to finely tune the ride quality of the shock. The treaded shock bodies offers 4-1/2” of ride height adjustment. The springs that get installed on the shock have a spring rate of 200 pounds. Total Control Products upper shock mount has three different positions. The three positions allow you to increase the cornering stability.
Buy a new Total Control Products Coilover Rear Suspension Kit with G-Link Adjustable Lower Control Arms for your 1971, 1972 or 1973 Mustang from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Related Categories: Mustang Parts, Mustang Suspension, Mustang Coilover Kits, Mustang Suspension Kits, Restomod Parts
Installation Difficulty

Advanced skill is required for this installation.