Trufiber Hood A53 Ram Air Fiberglass V6/GT 2005-2009

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 130.13ms
  • bvseo-msg: HTTP status code of 404 was returned;


  • Fiberglass Construction
  • Reinforced Latch/Hinge Plates
  • Uses Factory Mounting Hardware
  • Stainless Steel Mesh Grille
MSRP $599.00
You save $0.01

Trufiber Fiberglass A53 Ram Air Hood for 2005, 2006, 2007, 2008 and 2009 V6 and GT Mustangs.

Are you looking for a new hood for your 2005-2009 Mustang that has a built-in ram air kit and a fully functional heat extractor? One that will help keep your engine compartment cool while also looking good at the same time? If so, you've come to the right place. This ram air hood by Trufiber has all of these features and more!

Features & Benefits:
- Built-In Ram Air Kit and Fully Functional Heat Extractor
- Made of Hand Laid Fiberglass
- Show Quality, Smooth Gel Coat Finish on Hood's Top and Bottom
- Reinforced Metal Latch and Hinge Plate to Enhance Safety
- Integrated Stainless Mesh Grille
- Pre-Drilled Prop Hole
- Direct Bolt-On Installation Project Using OEM Hardware
- Weighs Approximately 40lbs.

This Trufiber TF10024-A53 Fiberglass A53 Ram Air Hood has a built-in ram air kit and heat extractor. The ram air kit will help keep cool air flowing into your engine compartment, and the heat extractor will help the hot air exit from your engine compartment. You might see a boost in performance and horsepower after you install this hood! This 40-pound fiberglass hood also offers plenty of other advantages in terms of looks too. It's constructed from hand-laid fiberglass and then finished in a show-quality smooth gel coat on the top and bottom. As an additional safety feature, the metal latch and hinge plate are reinforced. It also has an integrated stainless mesh grille.

For even more convenience, when it's time to install your new hood, you'll use your OEM hardware and the hole for your prop rod comes pre-drilled!

Please Note: For safety purposes, hood pins are required for ALL aftermarket hoods.

*This hood will require priming and painting before installation.

At CJ Pony Parts, we specialize in providing Mustang enthusiasts with the right parts at the right prices. Our selection of aftermarket parts includes a huge assortment of Mustang hoods and hood components such as scoops, turn signals, latches and more!

Order a Trufiber TF10024-A53 Fiberglass A53 Ram Air Hood for your 2005, 2006, 2007, 2008 or 2009 V6 or GT Mustang from CJ Pony Parts today!

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.11ms
  • bvseo-msg: HTTP status code of 404 was returned;

So.. Just want to make sure if this hood fits a 2006 mustang gt

Asked by: Buddy
Yes it does.
Answered by: rk cjpp
Date published: 2019-04-29

Will this fit a 2007 Shelby GT500

Asked by: Doug
No it will not, you need a hood that is gt500 specific.
Answered by: rk cjpp
Date published: 2018-12-17

I need to get replacement venting inserts for the top, how do I go about getting just that part? 

Asked by: Steve C Nevada
You will have to contact the manufacturer.
Answered by: rk cjpp
Date published: 2018-06-20

I have a 2005 Ford Mustang V6 Black. Do you paint the hood?

Asked by: Benp23
No we do not.
Answered by: rk cjpp
Date published: 2017-06-02

Will this hood fit with a Saleen supercharger  on a 2006 GT. 

Asked by: 1fast06
If the supercharger fits under the stock hood than there shouldn't be a problem fitting under this one.
Answered by: rk cjpp
Date published: 2017-02-17
  • y_2020, m_2, d_22, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_HDT83, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 128.62ms