Airaid PowerAid Throttle Body Spacer for all 2011, 2012, 2013, 2014, 2015 and 2016 GT Mustangs.
Airaid's PowerAid throttle body spacer was designed to increase your vehicle's off idle to mid-range performance and efficiency. The unique "Helix Bore" design of the PowerAid creates a spinning action of the incoming air. As air passes through your throttle body, this helical effect causes the air molecules to organize and maintain high velocity. This helps to provide a superior atomized mixture of fuel and air all the way into the combustion chamber. The benefit of the torque gains between 800 to 2500 RPM is tremendous and depending on driving conditions it can potentially increase your fuel economy.
Please Note: This Airaid Throttle Body Spacer will Not work on Mustangs with a 90mm or larger throttle body due to the length of the supplied bolts.
Airaid uses the highest quality Aircraft Grade Billet 6061-T6 Aluminum to manufacture and design each PowerAid Throttle Body Spacer for your application. Includes the necessary gaskets, hardware, and precision brackets to maintain proper geometry with the factory components. Installation takes less than a hour using common hand tools with no drilling or cutting required. Airaid is proud to have all their products made in the USA, with genuine American parts.
This throttle body spacer will also fit 2011-2014 F-150s with a 5.0L Engine.
Order the Airaid PowerAid Throttle Body Spacer for your 2011, 2012, 2013, 2014, 2015 or 2016 GT Mustang from CJ Pony Parts today!
Similar Mustang PartsMore EGR Valves & Spacers
Product ReviewsWrite a review
Which would give you more horse power and throttle response? 85mm throttle body and this air throttle body spacer or just a 90mm throttle body?
Thickness of throttle body spacer? Thanks
Will this product fit on the larger throttle bodies out there eg. 90mm Throttle body
Will this require a tune.
The istructions show a gasket but I did not have one and the quick take didn't show one. Is there supposes to be a gasket?
Will this void the factory warranty?
will this work on a 2014 Mustang GT with a stock throttle body, and what is the thicknness of spacer?
Will this work with the JLT cold air intake?
You Might Also Like
CJ's Low Price:$799.99
CJ's Low Price:$359.96
CJ's Low Price:$351.80
CJ's Low Price:$336.50
The Airaid throttle body spacer is made of high quality 6061-T6 aluminum. It's going to install easily between the throttle body and the intake using the supplied hardware. The throttle body spacer features a patented helix bore design, which according to Airaid is going to spin the air going into the manifold, which is going to provide low end torque as well as fuel economy and throttle performance.
The Airaid throttle body spacer will work with stock or aftermarket cold air kits.