Dynacorn Radiator Support With Crossmember Attached In Weld-Thru Primer 1965-1966

Dynacorn: 3640EWT

Regular Price: $158.99

Special Price: $143.09

1419379200 768
Earn 158 RPM Points What's this?
1418947200 1420070400
On Sale: End of Year Blowout!
3640EWT 3640EWT_1 3640EWT_2 3640EWT_3 3640EWT_4

Product Description

Dynacorn Radiator Support With an Attached Crossmember In Weld-Thru Primer for all 1965-1966 Mustangs.

Stop wasting your time trying to repair that old, rusted-out radiator support. Upgrade to Dynacorn's radiator support with an attached crossmember, constructed from high-quality stamped steel with a weld-thru primer finish.

This radiator support bridges the gap between the inner front fenders, stiffening the front of your Mustang while providing attachment points for the radiator, hood latch hardware and horn. The attached crossmember connects the front frame rails under the radiator support, further stiffening the front end.

We highly recommend buying this radiator support with an attached crossmember if you also need to replace the front crossmember at some point.

Advantages of Weld-Thru Primer:
- Reduces prep time when welding new parts to new parts that are both covered in the weld thru primer
- Reduced spatter
- Lower distortion of the panels
- Superior conductive properties that help minimize high heat zone problems
- Eliminates corrosion that would form between overlapped panels or multi-layered spot welds
- Helps when welding a new panel to old metal
- Lower resistance at the weld surface allows better penetration into the denser, new steel that helps forgive an old alloy's problems with porosity and impurities
- Helps prevent resin build up between welds that can trap moisture in the old porous steel that leads to failure at the weld borders

Similar Mustang Parts

similar mustang parts More Mustang Radiator Supports  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a Review
Great Product!
Had to replace the entire front end of my 66' Mustang and went with this radiator support. I gotta say that the dimensions were pin point perfect. The metal that Dynacorn uses is great, easy to work with and even easier to weld. I strongly recommend any Dynacorn sheet metal product for any replacement parts. Best quality on the market!
SAMUEL July 13, 2014
part better then most
great part. fits better then the cheaper ones. worth the money
Kevin July 9, 2014
2 Results

You Might Also Like