PORTION OF FRAME RAIL STARTING AT THE FRONT CROSSMEMBER & EXTENDING
UNDER THE SHOCK TOWER.
Product ReviewsWrite a review
Frame Rail Rt Half Front 29" Inner & Outer 1964-1970 is rated out of 5 by 3.
Rated 5 out of 5 by Mike68 from Excellent This product is very easy to use and very accurate to the original frame. Once you get the old frame cut out where you need to, this one slips right in in it's place. Highly recommend!
Date published: 2015-01-25
Rated 5 out of 5 by CJLO from Quality! Doing some serious frame repair on the 65. And again you can count on CJ to deliver a high quality part for a good price. The steel is of good grade, easy to weld, fit was outstanding!
Date published: 2016-02-27
Rated 5 out of 5 by Mitch M from Worked great! Cut out the old peices and these ones fit right into place! Worked excellent, highly recommend
Date published: 2015-02-11
Do these replace the front frame rails or just overlay existing?
You will cut out the old pieces and replace them with these.
Date published: 2015-11-12
how do i know which side is the right side and the left side on my car?
The driver's side is considered the left and the passenger's side is the right side.
Date published: 2015-06-05
You Might Also Like
CJ's Low Price:$44.99
By Bill Tumas: We're here with our front frame section for all '64 through '70 Mustang Coupe, Convertibles, or Fastbacks. This is the most common area you're going to find rust in the front of your frame rail. This comes in a two-piece design, has the mounted nuts for your bumper brackets already welded on. Your front frame section is going to go from your radiator support to back here underneath your shock tower. Where these two bolts are going through a rotisserie, are the two bolt holes for your front outer bumper bracket. You can use the entire frame section, or use a partial if necessary.