Front Frame Rail Complete Driver Side 1965-1970

CJ's Part Number: M363L
CJ's Low Price:
1455235200 23567
Earn 195 RPM Points What's this?
1455494400 1456704000
On Sale: Up to 30% Off Sale!
Front Frame Rail Complete Driver Side 1965-1970
Front Frame Rail Complete Driver Side 1965-1970 Play Front Frame Rail Complete Driver Side 1965-1970 Video 1

Product Description

Driver Side Complete Front Frame Rail for 1965-1970 Mustangs.

This one piece front frame rail includes both the inner and outer full front frame rail pieces welded together into one complete front frame rail. Also includes the sway bar mount installed to the side of the frame rail.

Similar Mustang Parts

similar Mustang parts More Frame Rails & Torque Boxes  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review

Product Questions


Any difference between this and the Dynacorn 3630X other than brand and price? Is this missing something the Dynacorn has?

Asked by: Hankabilly
M363L is a standard reproduction piece that we get from multiple different vendors, while 3630X is made by Dynacorn, who offers a little better quality and attention to detail.
Answered by: CJPP Dave
Date published: 2015-12-21

will mustang front frame rail fit a1965 falcon

Asked by: big farmboy
Unsure. Unless that fitment is listed, we simply haven't tested it on a Falcon, so we don't know.
Answered by: CJ Pony Parts
Date published: 2015-07-28
  • 2016-02-12T09:30CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_M363L, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts

You Might Also Like

Product Video

Front Frame Rail Complete Driver Side 1965-1970 Video Transcript
By Bill Tumas: We're here with this full front replacement frame rail for your '64 through '70 Mustang Coupe, Convertible, and Fastback. All of our frame rails come ready to install with all your holes predrilled.

Starting in the front there's a proper hole for the J-nut for your front valance hardware. Both holes for your front bumper bracket are predrilled, and the nuts are welded for mounting on the inside. The holes for your brake and fuel line clips are already installed, as well as the holes for your steering box. On the top of the frame rail, both holes are already drilled for your clutch linkage and have welded nuts for mounting.

Moving further down, your strut bar and sway bar mount is already welded to the frame rail. That's welded in the proper location for a '67 through '70 Mustang. If you're installing this frame rail on a '65 through '66, you'll have to move this an inch and a half forward. Moving to the bottom of the frame rail you'll see drilled and threaded holes for both your cross member and your slave cylinder.

Due to the unibody design of our Mustang, the front frame rail is a very important part of the structure. You want to make sure you use a high quality replacement, such as our one piece rail, and we suggest having it professionally installed.