Front Frame Rail Complete Driver Side Mustang 1965-1970

CJ's Part Number:
M363L
Rating:
92% of 100

Highlights

  • OEM-Style
  • Complete Frame Rail
  • Driver Side Specific
  • Direct Fit
MSRP $251.99
$194.99
You save 23%

Driver Side Complete Front Frame Rail for 1965, 1966, 1967, 1968, 1969 and 1970 Mustangs.

If your 1965-1970 Mustang has damage to the inner or outer front frame rails, then replace them with this Driver Side Complete Front Frame Rail, now available from CJ Pony Parts! This direct-fit front frame rail is one solid, single piece of high-quality sheet metal. It includes both the inner and outer full front frame rail pieces that have already been welded together into one complete front frame rail.

Features and Benefits:
- Direct-Fit Front Frame Rail 
- Solid One-Piece Design
- Sway Bar Mount Welded in Place
- Made of High-Quality Sheet Metal

The sway bar mount is already welded into place and installed to the side of the frame rail as well. This OEM-style complete frame rail will replace the inner and outer frame rails on your classic Mustang that have been damaged or rusted. Installation will be extensive, and we highly recommend having a professional install this frame rail for you.

Tech Tip: The position of the sway bar is correct for 1967-1970 Mustangs. Mustang owners with 1965-1966 models will need to modify the sway bar and move it an inch and a half forward.

Please Note: This Complete Front Frame Rail will fit on the driver side only. A Passenger Side Complete Front Frame Rail (M363R) is also available.

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

We're here with this full front replacement frame rail for your '64 through '70 Mustang Coupe, Convertible, and Fastback. All of our frame rails come ready to install with all your holes predrilled.

Starting in the front there's a proper hole for the J-nut for your front valance hardware. Both holes for your front bumper bracket are predrilled, and the nuts are welded for mounting on the inside. The holes for your brake and fuel line clips are already installed, as well as the holes for your steering box. On the top of the frame rail, both holes are already drilled for your clutch linkage and have welded nuts for mounting.

Moving further down, your strut bar and sway bar mount is already welded to the frame rail. That's welded in the proper location for a '67 through '70 Mustang. If you're installing this frame rail on a '65 through '66, you'll have to move this an inch and a half forward. Moving to the bottom of the frame rail you'll see drilled and threaded holes for both your cross member and your slave cylinder.

Due to the unibody design of our Mustang, the front frame rail is a very important part of the structure. You want to make sure you use a high quality replacement, such as our one piece rail, and we suggest having it professionally installed.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.