Chrome Ignition Switch Bezel for 1965-1966 Mustangs.This ignition switch bezel is made to factory correct specifications. Beautifully chrome plated with black paint in the recessed lettering around the face of the bezel.
Product ReviewsWrite a review
Ignition Switch Bezel Chrome 1965-1966 is rated out of 5 by 2.
Rated 5 out of 5 by providor from great website, excellent service While the garage trying to repair the ignition switch on my caar assured me this part would fit, it didn't, so I requested a return. This request was handled promptly with clear instructions for the process.
Date published: 2016-03-07
Rated 5 out of 5 by Lash from Multiple CJ Pony Parts I buy many parts from CJ Pony Parts, and I advertise them to other Mustang owners. CJ Pony Parts is a great source for old Mustang parts. CJ Pony Parts is pretty much my exclusive source.
Date published: 2015-05-10
Please could you tell me the dimensions of the bezel. Thanks
The dimensions are 1 1/4 inches across the face of the bezel and 3/4 inch deep.
Date published: 2016-03-14
Hello, do you have the Ignition switch Bezel that lights up? I would like the ignition switch with key, door locks with keys and latch for door lock and the Bezel that lights up. How much would all the cost if you have it. Thank you aj
Please call toll free at 1-800-888-6473 and speak with a sales rep, they will be able to help you with pricing.
Date published: 2016-02-09
how do take out the key switch on 1965 mustang
To remove, first disconnect the battery than turn ignition to accessory than using something like an unfolded paperclip stick it in the small hole in the tumbler and turn the key to the left past accessory and the tumbler should pull out. After the tumbler is removed reach under the dash than push the ignition switch toward the dash and turn the switch to the passenger side and it will release from the bezel.
Date published: 2015-11-18