Ignition Switch Cylinder 1965-1966
CJ's Part Number:
HW1541
Ignition Switch Cylinder 1965-1966 is rated
out of
5 by
10.
Highlights
- Features 2 Ignition Keys
- Premium Build Quality
- Direct-Fit Reproduction
- OE-Style Replacement
MSRP $9.50
$8.33 You save 12%
Ignition Switch Cylinder for all 1965-1966 Mustangs.
If you're having problems with the stock ignition switch on your 1965-1966 Mustang, then it's time to get a new one. Fortunately, CJ Pony Parts offers this high-quality ignition switch cylinder! You won't have any issues with your key catching or fitting properly in this new cylinder, and you can rest easy knowing you'll have a clean turn and ignition every time you want to start up your Pony to take it for a cruise down the road. Also, your order will include two (2) keys for your new ignition switch cylinder.
Features and Benefits:
- Premium Quality Build
- Features two Ignition Keys
- Direct-Fit Reproduction
Practically every Mustang starts using a key. You turn the key and your Mustang starts. However, when that simple act stops working, you might need to check out some of CJ Pony Parts' Mustang Ignition parts!
Order an Ignition Switch Cylinder for your 1965-1966 Mustang from CJ Pony Parts today!
Rated 3 out of
5
by
Woody from
Does not look like the picture
I was impressed with how quickly the lock cylinder was shipped and received. The fit was tight in my original ignition switch and worked a little sluggishly at first. This quickly worked itself out after a few twists. My main issue is the keys appear cheap and look nothing like the picture, which shows them cut for 5 tumblers. The keys received looked like skeleton keys, having only 2 tumbler cuts. I fear for the security of my pony! If it had proper keys, I would rate the product highly. I recommend this product and a trip to a locksmith to have it properly keyed.
Date published: 2019-06-27
Rated 4 out of
5
by
Oinkster from
Kinda cheap looking key -but works okay
My old lock and key was very badly worn so I bought this replacement. The key is very cheap looking. The key I received with my lock has two tumbler cuts. It reminds me of a cheap pad lock key. Nevertheless the lock and key function correctly. I am satisfied with the way it works. The price was good but would have preferred to pay a few more dollars and get a correct looking key.
Date published: 2018-07-07
Rated 4 out of
5
by
66rob from
Easy install
I bought this product and it installed very easily, but, when switching to the ignition position the key does not return to the on position. What could be the problem here. Is there supposed to be a spring that makes the key return. Please note that I have not installed the engine yet so have not attempted to start at all
Date published: 2019-05-16
Rated 5 out of
5
by
mustbeunique from
Bravo
Yep, fixed my problem, my other key/switch was stuck, took a little fiddling with the new one to figure out the position to insert it & even ended up reinserting old one to get the alignment/position worked out. New key's a bit rough getting out but I'm sure it'll get easier in no time.
Date published: 2016-02-20
Rated 5 out of
5
by
highsierramustang from
Little sticky at first.
Started off a little tight, quite sticky and hard to insert/remove key. After some graphite lock lube and a few turn overs, it's like you never installed a new one.
Date published: 2015-01-20
Rated 5 out of
5
by
Jimbo7273 from
Perfect fit
Changing the switch cylinder was easier than expected. CJ's delivered it quickly and I was back up and running.
Date published: 2016-10-29
Rated 5 out of
5
by
Brad A from
Easy to install
I was able to install this myself quite easily. If I can do it, everyone can! Works great.
Date published: 2015-06-26
Rated 1 out of
5
by
Mad mustanger from
I'm done
Simple key cylinder, no fit; simple gasket, back orders till the next moon landing.
Date published: 2019-07-20
Bought the new lock cylinder......won't go in.....old one? Same thing....Now what? 65 mustang by the way
The tumbler has to be in the correct position, you have to use a paper clip in the hole to push the stop in so you can turn it past the stop.
Date published: 2019-07-09
My 1965 mustang won’t shut off on less I pulll the wire on the solenoid
That sounds like a problem in the alternator wiring feeding power back through the ignition or an ignition wiring problem.
Date published: 2019-06-26
Can this be used on 65 falcon
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Date published: 2017-09-25
have a 1966 must how do I take take out ing switch
To remove the cylinder, disconnect the battery, with the key in the cylinder turn the ignition key to accessory, than using a small pick or an open paper clip push it in the small hole in the front of the cylinder and turn counter clock wise and pull it out of the ignition switch.
Date published: 2017-09-06
Does this cylinder fit into ignition switch motorcraft C7UZ-11572-A.
This is for the 65-66 ignition switches.
Date published: 2016-07-22
Will this ignition switch cylinder fit your part # ISA1 ? Thanks Mike
Yes they will work together.
Date published: 2015-02-26
Might Also Like
