Maximum Motorsports Black Caster Camber Plates for all 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988 and 1989 Mustangs.
If you have a lowered 1979-1989 Fox Body Mustang and want to ensure that the caster and camber are correct then you should purchase these Caster Camber Plates by Maximum Motorsports. Maximum Motorsports caster/camber plates are designed to maximize the performance of your Mustang's front suspension. Without adjusting the caster and camber on a lowered vehicle your suspension geometry will be out of spec, most likely leading to premature tire wear.
Features and Benefits:
- Black powdercoated finish
- Teflon lined spherical bearings
- Widest possible range of camber adjustment
- High grade alloy steel
The camber adjustment slots, when used in conjunction with the factory camber adjustment slots, allow for the widest range of camber adjustment possible. High grade Teflon lined spherical bearings are used at the strut top mounting point. Urethane bushings do not provide positive location, and induce bending loads on the strut that reduce the strut's lifespan and may even break the strut shaft. Plates are spaced well above the strut tower top to restore bump travel for lowered cars. High grade alloy steel allows Maximum Motorsport's plates to be thin and fatigue proof. Aluminum plates must be very thick and will un-necessarily reduce bump travel and hood clearance. A tasteful black powdercoat finishes off these caster camber plates.
Maximum Motorsports began in 1992 along the central coast of California as a manufacturer of Mustang parts. From their humble beginnings, Maximum Motorsports has developed suspension and performance parts and has consistently received praise from the automotive media, industry professional and customers for how well designed and engineered their parts are. It's caused Maximum Motorsports to experience rapid growth in the last 20 years, having to move numerous times to larger and larger facilities in the area.
Order Maximum Motorsports Black Caster Camber Plates for your 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988 or 1989 Mustang from CJ Pony Parts today!
Product ReviewsWrite a review
Will these plates work on Eibach Pro Kit coilovers?
You Might Also Like
CJ's Low Price:$4,300.00
CJ's Low Price:$1,053.45
CJ's Low Price:$16.99
Jack, tell us a little bit about caster camber plates. We sell a lot of them especially when people are lowering their cars but explain why you want something like this and tell us about your particular product.
Jack: Okay, caster camber plates are very important for performance Mustang use. They enable you to align the front suspension with geometry that's more optimized for handling. For instance, if you go around corners faster, you need the tire to have more negative camber which means tilted inwards. To do that, you need a camber plate so that you can move the strut inwards.
Bill: Especially when you lower your car. You're actually adjusting the camber simply by lowering it. You want to make sure you can get it proper.
Bill: The factory parts won't work in those cases to get it correct.
Jack: In a lot of cases they won't work. In addition, you want to add positive caster of the alignment, the stock '79 Mustang for instance, has around one degree of positive caster. That gives a very poor steering feel at high speeds on the freeway and corners. The steering just kind of wanders.
Bill: It kind of vague feel.
Jack: Vague feel. When you turn a corner and release the wheel, it doesn't return to center.
Jack: On a Fox Mustang you'd want say four to six degrees of positive caster. That will give the car much better high speed feel, it won't be as vague, it'll have better cornering grip in tight, low-speed corners for instance.
Bill: How much of adjustment do you get out of your caster and camber plates?
Jack: It depends on the particular model for the particular year and the chase to some degree. Typically the camber plate will allow as much adjustment as the car does because the hole in the strut tower limits how far the strut shaft can move.
Bill: OK. A product like this is available for all '79 through '14's, correct?
Bill: You have two different versions of this available?
Jack: Well from '79 to '89 we have one version. From '90 to '93 we have a different version because the strut towers are actually different.
Jack: Then from '94 to '04 we have a different version and then for S1 '97 chases, from 2005 up we have two versions.
Bill: These are available in black and chrome, I believe as well?
Jack: Black, powder coat or chrome plated.
Bill: Caster and camber adjustments are something obviously best left to a professional, but as far as installing, is this something you can pretty much do yourself in your garage?
Jack: Yeah, basic hand tools are all that are required. Is you have a SN95 Mustang you're going to need a drill and a drill bit to drill the fourth hole in the camber caster plate.
Jack: You may need, depending on what strut model you have, you may need an impact wrench to get this nut off the strut.
Bill: OK, but it's safe to install them and then take it to an alignment shop and have them do the actual adjustments for you.
Jack: Absolutely, yes.
Bill: Jack, we appreciate you coming out today. Thank you for telling us about your products. If you're looking for a high performance suspension for your late model Mustang, make sure you check out our selection of products from Maximum Motorsports.