Scott Drake Armrest Pad for Power Windows Passenger Side 1987-1993

CJ's Part Number: AR9R-V
CJ's Low Price:
$38.95
1480723200 41208
Earn 38 RPM Points What's this?
Scott Drake Armrest Pad for Power Windows Passenger Side 1987-1993
Scott Drake Armrest Pad for Power Windows Passenger Side 1987-1993 Scott Drake Armrest Pad for Power Windows Passenger Side 1987-1993 Scott Drake Armrest Pad for Power Windows Passenger Side 1987-1993 Scott Drake Armrest Pad for Power Windows Passenger Side 1987-1993 Play Scott Drake Armrest Pad for Power Windows Passenger Side 1987-1993 Video 1 Play Scott Drake Armrest Pad for Power Windows Passenger Side 1987-1993 Video 2
Scott Drake

Product Description

Scott Drake Passenger Side Armrest Pad for 1987-1993 Mustangs with Power Windows.

Replace your faded or worn out armrest pad with this quality reproduction. Features high quality urethane made in the USA. The armrest pad fits cars with power windows.

Available in five factory colors. Can be painted to match any interior color.

*Hardware sold separately.

Similar Mustang Parts

similar Mustang parts More Door Panels  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 89.47ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

Any possibility of procuring the color white arm rest pads now or in the future, right and left sides????

Asked by: jasleck43
They are not available at this time and there is no ETA regarding them being available in the future.
Answered by: CJPP Dave
Date published: 2016-01-12

Is the red a Scarlet or Ruby?

Asked by: VBPaul
Scott Drake does NOT call it out as either. They just list this as "Red"
Answered by: CJPP Dave
Date published: 2015-11-03
  • 2016-12-01T08:14CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_AR9R-V, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 140.64ms
  • QUESTIONS, PRODUCT

You Might Also Like

Product Video

Scott Drake Armrest Pad for Power Windows Passenger Side 1987-1993 Video Transcript
By Bill Tumas: We already showed you how to replace the commonly sagging map pockets found in Fox Body Mustangs. One other part that sees a lot of wear is going to be your armrest pads. Particularly on a convertible like ours, they tend to fade, and over time they also tend to warp, making for a really poor-looking door panel. So today we're going to show you how to install a set using our 1990 Mustang convertible. For this installation you'll need a small pick, a 3/8 ratchet, a 3/8 socket, short extension, and a Phillips head screwdriver.

You can see our original armrest is warped in the middle here. It's also badly faded and doesn't match our door panel any longer. The first step in removing it is to pull these two plastic plugs off. Use a small pick to just go around the edge here, underneath it, and pop them out. We'll now remove the two bolts behind those covers. Now we're going to remove the two Phillips head screws, one on the back, then one on the front. Now we're going to lift it upward. We're going to pull out to release the clips.

Once we're have the armrest off the door we can remove these four screws that hold the pad to the armrest. And we're going to remove our original armrest. You want to make sure you leave this original piece of trim in place; you're going to need it for your new armrest. There's alignment pins here. We're going to match them to the holes in the armrest pad. Press it down and turn it over and screw it back in. Once we have the pads screwed to the armrest, we're going to reinstall the armrest. And our installation's complete.

That's a huge improvement over our faded and warped original pad. Installation should take you no more than about 15 to 20 minutes. You'll be back on the road in no time.