SSBC Standard Front Disc Brake Conversion Kit for 1964-1966 6-Cylinder Mustangs with non-power brakes.Caliper Specs:
Type of Caliper - Standard
Number of Pistons - 1
Piston Size - 57mm
Constructed From - Cast Iron
Diameter - 10.25"
Thickness - 0.875"
Venting -Uni Directional (straight vane)
Standard Finish - Standard
Bolt Pattern - 4 x 4.5"
-Pair of Rotors
-Pair of Calipers
-Front Brake Pads
-Dual Bowl Master Cylinder
-2 Brake Hoses
-All Brackets, Bearings, Seals & Hardware
*Requires use of 14" or larger wheels
*Master cylinder will not bolt to stock booster on vehicles with O.E. power drum brakes
*Bolts to factory 6-cylinder spindles
Similar Mustang PartsMore Restomod Brakes
Product ReviewsWrite a review
i have a1966 mustang 4 lug 6 cyl do i need to change master cylinder from a one line to a two line when i change from drum to front disk no power booster.
My 66 Mustang still has the original 14X5 steel rims. Will these rims fit with this kit? Also, does it come with the center cap?
On the SSBC #A120-4, does the wheel "track" width stay the same as factory, left to right, or does it increase or decrease with the stock wheel back spacing using this brake conversion?
I need to replace my disc brake pads. What brake pads does this kit use.
You Might Also Like
CJ's Low Price:$994.99