Accel Coil Pack Supercoil Black Set Focus ST 2013-2018/Focus RS 2016-2018
Set of Accel Black Supercoil Coil Packs for all 2013, 2014, 2015, 2016, 2017 and 2018 Focus STs and 2016, 2017 or 2018 Focus RSs.
Further increase the performance levels of your 2013-2018 Focus ST or 2016-2018 Focus RS by upgrading your factory coil packs to this Set of Accel Black Supercoil Coil Packs from CJ Pony Parts! This set of four coil packs is a direct replacement that will have your ignition firing faster and more efficient.
Accel Supercoil Coil Packs 140670K-4 Features and Benefits:
- Up to 15% Increase in Spark Energy
- Improved Throttle Response
- Shock and Vibration Resistant High-Temperature Vacuum Applied Epoxy
- Maximizes Fuel Mileage
- Direct OEM Replacement
- ODB II Compatible
- Sold as a Set of 4
- Easy Installation
Accel has brought their high-quality high output coil-on-plug Supercoil coil packs to the Focus ST and Focus RS. The Accel Supercoil puts out up to 15% more energy than the stock coils. This increase in energy will improve the throttle response of your ST or RS and maximize its fuel mileage. Optimized windings, resistance and turn ratios increase the efficiency of your engine to provide its maximum horsepower potential. To ensure constant operation the coil packs feature a high-temperature vacuum applied epoxy that is resistant to shock and vibrations. You will receive a set of four coil packs that are ODB II compatible and are a direct OEM replacement for easy installation.
Accel has more than 40 years of experience manufacturing performance ignition systems and components. Over those years, ACCEL has established themselves as one of the industry leaders in ignition products by providing the highest quality and reliable parts in the industry.
Order this Set of Accel 140670K-4 Black Supercoil Coil Packs for your 2013, 2014, 2015, 2016, 2017 or 2018 Focus ST or 2016, 2017 or 2018 Focus RS from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:
- 1965 and older U.S. manufactured California certified vehicles
- 1967 and older U.S. manufactured federally certified vehicles
The Focus ST is a great performing car right from the factory, but there's always room for improvement. Today, we're going to be installing these Accel supercoils.
These are Accel supercoil coil packs designed to fit your 2013 to 2018 Focus ST and your 2016 to 2018 Focus RS. They're going to be a direct fit replacement for the original coil packs and come with a black finish to maintain an OEM look. They're going to increase spark energy up to 15%, which is essential for higher boost applications and will improve your throttle response.
For more information and pricing, click the link down in the description. Now, let's get to the install.
These coils are pretty easy to replace. The first thing you want to do is remove the engine cover. To replace this coil right here, we need to remove this intake pipe, so that's the first thing we're going to remove. Loosen both hose clamps. Once you get this clamp loosened, this pipe can come right out.
We have access to all four coils now. All you have to do is remove the bolt that secures each one and then unplug the connector. Grab your new Accel coil, put it into the engine, snap it onto the spark plug, plug in the connector, and reinstall the bolt. Easy as that. Just do the same thing for all four.
All right. All four coils are in. It was as simple as that. Now you can reinstall your intake tube.
Okay, we got our Accel supercoils installed in our 2013 Focus ST. The black finish gives it a nice stealthy look, but if you do want added color, we do offer them in different colors. Install was super straightforward and shouldn't take you more than 10 or 15 minutes, and before you know it, you'd be heading down the road.