B&M Torque Converter Holeshot 2400-2600 Stall With 11-7/16" Bolt Circle C6 1967-1973
- Higher Stall Speed
- Quicker Acceleration
- Steel Alloy Pump Drive Tube
- 1.38 Crank Pilot
B&M 2400-2600 Stall Holeshot Torque Converter with an 11-7/16" Bolt Circle for all 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a C6 Automatic Transmission.
If your 1967-1973 Mustang with a C6 Automatic Transmission utilizes a modified engine, particularly with big cams that can reduce low end power and torque, then this B&M 40475 2400-2600 Stall Holeshot Torque Converter with an 11-7/16" Bolt Circle is specifically designed for you. The higher stall speed of this converter will launch your pony into a higher RPM range where more torque is readily available, resulting in quicker acceleration that leaves the rest of the herd in your dust.
Holeshot torque converters feature furnace brazed impeller and turbine, new precision steel alloy pump drive tube, new heavy duty needle bearings between the stator and impeller (not a thrust washer) and needle bearings between the stator and turbine. Additional features include a new turbine hub and new springs and rollers in the stator. This torque converter has a 11.437 inch bolt circle and 1.375 inch crank pilot. Stall speed listings are based on engines producing 230 pounds per feet of torque at 2,500 RPM. More torque at 2,500 RPM will give you more stall speed, less torque at 2,500 RPM will give you less stall speed than the stall speed ratings indicated.
Features and Benefits:
- Needle bearing between stator and turbine
- Higher stall speed
- Quicker acceleration
- Furnace brazed impeller
- Furnace brazed turbine
- Steel alloy pump drive tube
- 1.38 crank pilot
Please Note: If your vehicle is equipped with a plate type nitrous system, please refer to the Nitrous Holeshot line of converters.
Often times, upgrading the engine on your Mustang also means that you have to upgrade other components to be able to handle the extra power. One of the components most frequently requiring an upgrade is the transmission parts, and one of the leaders in providing those parts is B&M Racing & Performance. CJ Pony Parts has many parts from B&M Racing & Performance, giving you lots of ways to get your Mustang ready to perform.
Order this B&M 40475 2400-2600 Stall Holeshot Torque Converter with an 11-7/16" Bolt Circle for your 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang with a C6 Automatic Transmission today from CJ Pony Parts.
California Residents: Proposition 65 Warning