Baer Brakes Bumpsteer Kit Mustang V8 With Manual Steering 1965-1966

Baer Brakes:


  • Optimizes Steering Geometry
  • Teflon-Lined Bearings
  • Shim Set
  • Aluminum Sleeves

Baer Brakes Bumpsteer Kit for 1965 and 1966 V8 Mustangs with Manual Steering.

You don't need to put up with bumpsteer after lowering your Mustang or altering its caster and camber. In fact, with Baer's Bumpsteer Kit 3261001, you can optimize steering geometry and eliminate unsafe driving conditions during simple maneuvers like hard braking and cornering. Driving your 1965-1966 V8 Mustang with Manual Steering will not only be more enjoyable but safer, too.

Features and Benefits:
- Hardened Chrome-Moly Pins
- Teflon-Lined Chrome-Moly Spherical Bearings
- Aluminum Sleeves
- Eradicates Bumpsteer

By allowing compensation for ride height and suspension geometry changes, the pin-height-adjustable tie rods allow a more optimal range of articulation between the tie rod and the steering arm. Adjusting the tie rod height is as easy as moving the steel spacers from top to bottom on either side of the spherical bearings. 

Kit Includes:
- Pair of Tapered Pins
- Shim Set
- Pair of Teflon-Lined Heims
- Nylock, Lock Nuts for Pin End and Jam Nuts as Needed per Application

California Residents: Proposition 65 Warning

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.