Baer Bumpsteer Kit Manual Steering V8 1965-1966

Baer Brakes:
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 188.64ms
  • bvseo-msg: HTTP status code of 404 was returned;


  • Hardened Chrome-Moly Pins
  • Teflon-Lined Bearings
  • Shim Set
  • Aluminum Sleeves
MSRP $194.45
You save $5.45

Baer V8 Bumpsteer Kit for 1965-1966 Mustangs with Manual Steering.

Understanding Bump Steer:
Lowering a vehicle or altering its caster and or camber can lead to unsafe driving conditions, commonly called "bump steer." Simple maneuvers, such as hard braking, cornering or traveling over road-surface irregularities, can cause the vehicle to dart in an unexpected direction. Baer Trackers can solve this problem! The pin-height-adjustable tie rods allow compensation for ride height and suspension geometry changes, enabling a more optimal range of articulation between the tie rod and the steering arm. Steering geometry is optimized and bump steer is eradicated. To adjust the tie rod height, simply move the steel spacers from top to bottom on either side of the spherical bearings.

- Hardened chrome-moly pins
- Teflon-lined chrome-moly spherical bearings
- Aluminum sleeves

- Pair of tapered pins
- Shim set
- Pair of Teflon lined Heims
- Nylock, lock nuts for pin end and jam nuts as needed per application.
- Instructions

Smooth out those bumps in the road, plus improve the handling and overall driving performance of your car with a new bump steer kit from CJ Pony Parts. CJ Pony Parts carries kits for all models and years. If you’re not sure which bump steer kit is right for your vehicle, you can always contact one of our knowledgeable product specialists for expert guidance. We’ll never steer you wrong at CJ Pony Parts!

Order your Baer V8 Bumpsteer Kit for 1965-1966 Mustangs with Manual Steering from CJ Pony Parts today!

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.51ms
  • bvseo-msg: HTTP status code of 404 was returned;

I have a stock 65 mustang automatic V8 289 with power there a bump steer kit for my car? I'm noticing this is just for manual steering. If not, then what do you recommend?

Asked by: hitmas
We do not offer a bump steer kit for a power steering equipped car.
Answered by: rk cjpp
Date published: 2016-09-30

Will this Baer bump steer kit FIT MY 66 Mustang with Granada disc brakes & spindle's , that has Shelby1'' drop, roller perched ,and adjustable strut rod's & ASI gas shocks , If I remember correctly I think I may have Granada tie rod ends

Asked by: fgl350
With Granada spindles you need to order the 70-73 Mustang kit. They have the same taper as the Granada. You may end up having to trim the adjuster sleeve to get toe-in properly set as the 65/66 Mustangs are bit narrower than 70-73's. 
Answered by: Joe66fb
Date published: 2018-05-16

Will this kit work on my 1966 mustang . I installed a Flaming River manual rack & pinion along with a Pro motorsports Neg. Wedge kit about 8 years ago. The steering was way out of whack. It sat for 8 years, I now want to make it drivable.

Asked by: Tom G
With all of those custom options, I'd recommend contacting sales team member (1-800-888-6473), and they can walk you through fitment. It's a little more involved than I can cover here.
Answered by: CJ Pony Parts
Date published: 2015-04-24
  • y_2019, m_10, d_21, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_BSK1, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 159.8ms