Battery Tray Mounting Kit 1965-1970

CJ's Part Number:
HW244
Battery Tray Mounting Kit 1965-1970 is rated 3.6 out of 5 by 9.
  • y_2020, m_1, d_20, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_HW244, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 214.84ms
  • REVIEWS, PRODUCT

Highlights

  • Fits 1965-1970 Mustangs
  • Complete Kit
  • OEM Style Replacement
  • Easy Installation
MSRP $9.10
$6.99
You save 23%

Battery Tray Mounting Kit for all 1965, 1966, 1967, 1968, 1969 and 1970 Mustangs.

You will have a more professional outcome when using the correct parts for your restoration. So, when it comes time to replace that old rusted battery tray, have the proper mounting hardware, it will even make your installation go much more smoothly. Pick up this Battery Tray Mounting Kit for your 1965-1970 Mustang from CJ Pony Parts and save yourself the headache.

Battery Tray Mounting Kit Features and Benefits:
- Kit includes 4 bolts, 2 u-nuts and 2 nuts
- Directly replaces factory original
- High-quality reproductions
- Finish is resistant to corrosion
- Constructed from high-grade metal
- No special tools needed speedy install
- Properly secures the battery tray in place

This direct-fit kit of hardware is all you need for a proper installation of your pony's battery tray. Each of the eight pieces is made from high-quality metal and comes in a corrosion-resistant finish. No specialty tools are needed to use the pieces of this mounting kit, and since they're new they'll install and hold better than re-using the old ones.

Whether you’re looking for an exterior mirror, wheels and tires, headlights and taillights or a set of interior upholstery, CJ’s has what you need to complete your classic Mustang restoration with ease! CJ Pony Parts has all the parts you need to bring your early model Mustang build back to life--browse our huge selection of restoration parts for your pony today!

Order this Battery Tray Mounting Kit for your 1965, 1966, 1967, 1968, 1969 or 1970 Mustang from CJ Pony Parts today!

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Vehicle Fitment

This product will fit the following Mustang years:

Rated 3 out of 5 by from Battery Tray Hardware I bought this on the night of the 14th and they showed up at my door on the 16th. So the shipping was fast. Hardware is very well made and the job was easy to complete. However. The two lower bolts for the battery tray support were to short to fit between the fender wall and through the baskets. I had to use my two original upper battery tray bolts instead. The others worked very well. Maybe these would have fit the car when new but if there is any age (i.e a day after it was manufactured) just be aware that the two lower ones will be about 1/4 inch to 1/2 inch to short. But they are nice bolts and the two that are short can be used else wheres. So no hardware unused. Thanks CJ Pony for the lighting fast shipping.
Date published: 2015-12-17
Rated 1 out of 5 by from Your '68 must be different than my '68 Your '68 must be different than my '68 because your mounting bolts were 1/4" to 1/2" too short to use. Accordingly I had to clean, repaint and reuse the old. Alas, all was not wasted, I did use the 2 clip-nuts. Anyone need four nice looking but too-short bolts? Foolish me, a yonk, for expecting the experts knew better.
Date published: 2018-02-07
Rated 3 out of 5 by from Bolts too short Others have found the same problem, the two bottom bolts coming in from the wheel well area need to be a minimum 1/4" longer, 1/2" longer would be better. There's nothing under the battery tray for the bolts to run into, so they could easily be much longer than they are.
Date published: 2019-02-19
Rated 3 out of 5 by from Battery tray hardware The same problem as others have mentioned, the lower two bolts are too short. I'm a bit surprised given the number of comments about this that the supplier hasn't addressed this. If you purchase this package be prepared to source longer bolts (approx 1/4" longer)
Date published: 2019-04-01
Rated 2 out of 5 by from Bolts not long enough After installing a new inner fender, the bolts provided were not long enoughto reach the J-clips on the battery tray. It may just be my experience due to the new inner fender, but could be a problem for others doing the same repair.
Date published: 2015-06-10
Rated 5 out of 5 by from Bolts are TO SHORT! These bolts are to short, I used two fender bolts instead, will use the bolts some where else.
Date published: 2018-11-11
Rated 5 out of 5 by from Worked fine Did what I needed them to do and they matched the area I was installing them.
Date published: 2017-11-17
Rated 5 out of 5 by from battery tray hardware I bought this to install my new apron and battery tray on my 69 Mustang
Date published: 2015-06-20
  • y_2020, m_1, d_20, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_HW244, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.67ms
  • REVIEWS, PRODUCT
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 4.33ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;