BBK Cold Air Intake Kit Chrome V6 2005-2010

BBK: 1737
MSRP: $229.99
CJ's Low Price:
1508630400 4275
Earn 199 RPM Points What's this?
BBK Cold Air Intake Kit Chrome V6 2005-2010

Product Description

BBK Chrome Cold Air Intake Kit for 2005, 2006, 2007, 2008, 2009 and 2010 V6 Mustangs.

Do you want to increase the horsepower and torque of your 2005-2010 V6 Mustang? Install this Cold Air Intake Kit from BBK to get some serious gains!

Features and Benefits of the BBK Cold Air Intake Kit (1737):
- +20 rear wheel horsepower
- +20 ft-lb torque
- Increases throttle response
- Provides better fuel mileage
- Includes high flow air filter
- Chrome finish
- Direct-fit bolt-on kit
- Made in the USA

Designed to work with your S197's factory computer or with an aftermarket programmer, BBK's cold air intake kit for the popular 2005-2010 V6 Ford Mustang delivers a lot of bang for the buck. Testing on dozens of stock 2005-2010 Mustang models has shown consistent gains of 20 RWHP and 20 RWTQ with no other add-ons and the stock computer program.

This high level of performance with the stock program is achieved by utilizing a custom integral mass air housing which is machined into an aluminum casting and features a calibration of the factory mass air. Each BBK Cold Air Intake model has been designed and dyno tested at the BBK headquarters in Southern California to maximize performance.

*Tune may be required.

Here at CJ Pony Parts, we carry a wide variety of performance parts from BBK Performance including intake manifolds, exhaust headers and suspension components. Whether you're looking for increased performance, a specific part for the restoration process or simply need a replacement, we have what you are looking for.

Order BBK's 1737 Chrome Cold Air Intake Kit for your 2005, 2006, 2007, 2008, 2009 or 2010 V6 Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Mustang Parts  

Installation Instructions


Difficulty: Moderate

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 119.02ms
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

Can you help me I'd a. Cold air system it was a gift no brand name. I put it on car and like the throttle response and sound of engine but it made check engine light come on so I need tuner but not sure what I have.

Asked by: Cashbodad
You should remove this and install the stock intake untill you find out what brand it is.
Answered by: rk cjpp
Date published: 2017-03-31

I have 2010 v-6 will I have to have it tuned after the cold air intake as long as there's no other mods.

Asked by: Skooter stang
Yes, a tune may be required.
Answered by: rk cjpp
Date published: 2017-03-23

it says "tune may be required", does that imply it won't run at all or maybe a bit rough. That would allow one to drive to the local shop and have them tune it. Important to know I think

Asked by: Klaus and Freddy
You can drive it carefully to a shop to have it tuned.
Answered by: rk cjpp
Date published: 2017-03-23
  • y_2017, m_10, d_21, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_CAK36, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 54.29ms

You Might Also Like