Chevrolet Performance 350 C.I. Deluxe Crate Engine 357HP

This modern engine (19433033) swaps out a flat-tappet camshaft for a hydraulic roller design. It also utilizes a Small Block intake manifold, providing 357 horsepower and 407 ft-lbs. of torque! The block uses Vortec iron cylinder heads and 4-bolt mains and includes a distributor, damper, and flexplate.

Features and Benefits:
- Engine Type: Chevy Small-Block V8
- Displacement (cu in): 350
- Bore x Stroke (in): 4.000 x 3.480
- Block: Cast-iron with 4-bolt main caps
- Crankshaft: Forged steel
- Connecting Rods: Powdered metal
- Pistons: Cast aluminum
- Camshaft Type: Hydraulic roller
- Camshaft Lift (in): .473 intake / .473 exhaust
- Camshaft Duration (@.050 in): 215° intake / 223° exhaust
- Cylinder Heads: Cast iron; as cast with 64cc chambers
- Valve Size (in): 1.940 intake / 1.500 exhaust
- Compression Ratio: 9.0:1
- Rocker Arms: Stamped steel
- Rocker Arm Ratio: 1.5:1
- Recommended Fuel: Premium pump
- Ignition Timing: 32° Total @ 4,000 rpm
- Maximum Recommended rpm: 5600
- Balanced: External
- Flexplate: 12.750
- Intake Manifold: Dual Plane

Additional Notes:
- Holley 4-barrel carb included but not installed on engine
- Requires fuel supply line from fuel pump to carburetor
- Comes with 12.750" externally balanced 153-tooth automatic transmission flexplate. Requires externally balanced flywheel for manual transmission.
- Not intended for marine applications
- Distributor with melonized steel gear MUST be used with long-blocks and Partial engines with steel camshafts, or engine damage will occur.

*Only for use on pre-pollution controlled vehicles: Designed for pre-1976 street vehicles or any off-road vehicle.