COBB Front Mount Intercooler Factory Location Silver F-150/ Raptor 2.7L/ 3.5L 2017-2021
- Direct Fit Upgrade
- Improved Air Temperatures
- 70% More Volume
- Installs In Stock Location
COBB Silver Factory Location Front Mount Intercooler for 2017, 2018, 2019, 2020, and 2021 F-150s and Raptors with 2.7L and 3.5L engines.
When it comes to engine performance, cooler intake air is better! This Front Mount Intercooler (7F1527-SL) from COBB is significantly larger and more effective than before and installs in the OE location with no cutting required.
Features and Benefits:
- Compatible with Accessport Off The Shelf Maps
- ~70% larger volume than stock intercooler core
- Cooling surface area 10% larger than stock
- Cast aluminum TIG welded assembly
- No cutting, trimming, or permanent modification to the vehicle required
- Mates up snugly to OEM shutter shroud to funnel air through ambient side fins like OEM
It’s no secret that the stock front mount intercooler (FMIC) on the Ford F-150 2.7L and 3.5 EcoBoost trucks are undersized and quickly become heat soaked. This causes a reduction in available power. For that reason, an upgraded front mount intercooler is the best hard part upgrade for your F-150 EcoBoost!
This cast aluminum, TIG welded assembly has a core with 70% greater volume than the stock unit and offers 10% more cooling surface area. All while mating snugly to the OEM shutter shroud requiring absolutely no cutting, trimming, or permanent modification to the vehicle.
This FMIC was designed in house with attention to detail lacking on other aftermarket offerings. Computational fluid dynamic analysis was used to create the smoothest end tank design which increases flow evenly and resulted in no areas of significant turbulence.
The outlet port of the intercooler was also designed with a large chamfer to provide a smooth transition out of the intercooler into the throttle body tube to further reduce turbulence in the system.
For those planning additional modifications like water or methanol injection, this intercooler also has two flat sections into the casting. The top flat can easily be drilled and tapped to introduce a nozzle. The bottom flat can be used as a drain port.
California Residents: Proposition 65 Warning
This item is 50-state legal (CARB E.O. Number D-660-18)