COBB Front Mount Intercooler Factory Location Black Ford F-150/ Raptor 2.7/ 3.5L 2017-2021
- Installs In Stock Location
- No Cutting Or Drilling
- Cooler Air Adds Power
- Direct Fit Upgrade
COBB Black Factory Location Front Mount Intercooler for 2017, 2018, 2019, 2020, and 2021 Ford F-150s and Raptors with 2.7L and 3.5L engines.
Factory intercoolers aren't built to withstand even stock power! Want to pick up more power thanks to cooler air? This COBB Air Cooler offers 70% more volume and a 10% larger cooling surface for more performance! Plus, it installs easy with no cutting or drilling required.
Features and Benefits:
- Compatible with Accessport Off The Shelf Maps
- ~70% larger volume than stock intercooler
- Cooling surface area 10% larger than stock
- Cast aluminum TIG welded assembly
- No cutting, trimming, or permanent modification to the vehicle required
- Mates up snugly to OEM shutter shroud to funnel air through ambient side fins like OEM
It’s no secret that the stock front mount intercooler (FMIC) on the Ford F-150 2.7L and 3.5 EcoBoost trucks are undersized and quickly become heat soaked. This causes a reduction in available power. For that reason, an upgraded front mount intercooler is the best hard part upgrade for your F-150 EcoBoost!
This cast aluminum, TIG welded assembly has a core with 70% greater volume than the stock unit and offers 10% more cooling surface area. All while mating snugly to the OEM shutter shroud requiring absolutely no cutting, trimming, or permanent modification to the vehicle.
This FMIC was designed in house with attention to detail lacking on other aftermarket offerings. Computational fluid dynamic analysis was used to create the smoothest end tank design which increases flow evenly and resulted in no areas of significant turbulence.
The outlet port of the intercooler was also designed with a large chamfer to provide a smooth transition out of the intercooler into the throttle body tube to further reduce turbulence in the system.
For those planning additional modifications like water or methanol injection, this intercooler also has two flat sections into the casting. The top flat can easily be drilled and tapped to introduce a nozzle. The bottom flat can be used as a drain port.
California Residents: Proposition 65 Warning
This item is 50-state legal (CARB E.O. Number D-660-19)