COMP Cams Camshaft Set XFI VSR Stage 2 For Naturally Aspirated Engines 4.6L 3V GT 2005-2010

COMP Cams:
127300
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 137.5ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Highlights

  • Increased Horsepower
  • Increased Torque
  • Great All Around Performance
  • Direct-Fit Replacement
MSRP $862.18
$775.97
You save 10%

COMP Cams Valve Springs Required XFI Stage 2 Camshaft Set for 2005, 2006, 2007, 2008, 2009 and 2010 GT Mustangs Equipped with Naturally Aspirated 4.6L 3V Engine.

For those hardcore enthusiasts looking to achieve substantial horsepower and torque increases and who aren't intimidated by having to upgrade their valve springs, COMP Cams offers a full line-up of XFI VSR (Valve Springs Required) Cam Sets for Ford 4.6L/5.4L Modular 3V Engines that offer as much as 40 HP increases over stock levels.

These cam sets are also available in two stages. Designed to work with the Ford variable cam timing (VCT) system, these camshaft sets are direct replacements that bolt in without engine modification except the valve spring upgrade. By working with the VCT, which is programmed to retard the camshaft timing at peak power, COMP Cams XFI VSR Cam Sets for Ford 4.6L/5.4L Modular 3V Engines optimize both mid-range and high RPM performance.

Camshaft Features:
-RPM Range 950-6400 (solid power gains above 4600 RPM)
-Duration: Intake 261/ Exhaust 278
-Duration @ .050" Lift: Intake 222/Exhaust 235
-Lobe separation (degrees) 115.5
-Intake centerline (degrees) 101
-Valve Lash Hydraulic
-Valve Lift: Intake 0.49/ Exhaust 0.48"

Order this COMP Cams Valve Springs Required XFI Stage 2 Camshaft Set for your 2005, 2006, 2007, 2008, 2009 or 2010 GT Mustang Equipped with Naturally Aspirated 4.6L 3V Engine from CJ Pony Parts today!

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.46ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Will the stock bottom end hold to these cams or is a bottom end up grade necessary ?

Asked by: icehorse
As long as the bottom end is in good condition an upgrade is not necessary, a set of XFI VSR valve springs is required though.
Answered by: rk cjpp
Date published: 2016-07-15

Which set of Springs is recommended to use with the COMP stage 2 cam shafts? (.50, .55, or .65)

Asked by: Gonzo94
I'd recommend going with the .55 springs, here: http://www.cjponyparts.com/comp-cams-beehive-valve-spring-set-0-550-max-lift-46l-3v/p/2611324/
Answered by: CJPP Dave
Date published: 2015-12-08

Is there a tune needed for NA in combination with JBA longtubes? How many miles does the springs work correctly?

Asked by: Mealoneathome
With those extensive upgrades, you'll likely want a tune no matter what.
Answered by: CJ Pony Parts
Date published: 2015-06-22
  • y_2019, m_9, d_20, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_127300, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 138.11ms
  • QUESTIONS, PRODUCT