cp-e Intercooler Lightweight Front Mount Focus ST 2013-2018

cp-e:
FDCK00006T
Rating:
97% of 100

Highlights

MSRP $718.45
$598.49
You save 17%

cp-e Lightweight Front Mount Intercooler for all 2013, 2014, 2015, 2016, 2017 and 2018 Focus STs.

While the factory intercooler on 2013-2018 Focus STs does an great job for the everyday driver, you will need to upgrade it if you crave to go a little faster. In that case, don't hesitate on purchasing this Lightweight Front Mount Intercooler from cp-3. Designed to combine performance with a smaller footprint, this intercooler will allow you to improve the power of your Focus ST and modify it in smaller increments.

Features & Benefits:
- Lightweight Design with Maximum Core Layout
- 28" X 8-1/4" X 3-1/2" Core
- Fully Cast End-Tanks
- Minimal Pressure Drop & Turbo Lag
- Provides Optimal Airflow with Even Distribution
- Significantly Lower & More Consistent Charge Temperatures
- Bolt-On Design with Factory Mounting Locations

*The cp-e Lightweight Front Mount Intercooler will not fit the 2016-2018 Focus RS.

Cp-e's FDCK00006T intercooler features a lightweight design that will still improve and enlarge the core compared to its stock counterpart. The core itself is 28" x 8-1/4" x 3-1/2" and makes use of the bar & plate design to make sure there is still a high level of efficiency. The smaller, lightweight configuration will help minimize any turbo lag along with any overall pressure loss on your Focus ST.

As all of their others, cp-e crafts this intercooler to include cast end-tanks that have been welded and pressure tested with the core. The engineering of these end tanks will virtually eliminate turbulence within them to keep the overall drivability of your Hot Hatch at a premium. These end tanks also come with laser cut brackets which will help this intercooler mount right in the stock location, directly bolting into place.

Once mounted within your engine bay, this intercooler will provide the optimal amount of airflow with an even distribution throughout its core. The end tanks will direct the air properly into the core to provide your Focus ST with the most consistent conditions going into the engine. In fact, you'll see significantly lower and more consistent charge temperatures.

What are you waiting for? Purchase cp-e's FDCK00006T Lightweight Front Mount Intercooler for your 2013, 2014, 2015, 2016, 2017 or 2018 Focus ST from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Note: This item is not CARB (California Air Resource Board) exempt and is not legal for sale or use in the state of California.

Installation Videos

Video Transcript

We’re here with cp-e's lightweight front mount intercooler, fitting your 2013 through 2016 Focus ST. The cp-e lightweight intercooler is made right here in the USA, and will be a direct replacement for the factory intercooler found on your 2013 through 2016 Focus ST. It's going to be lighter than cp-e's standard intercooler, and installed with the factory bracket and the factory pipes. Features cast end tanks, and includes clamps and all necessary hardware for installation. Make sure you check out CJPonyParts.com for other cp-e performance parts for your Focus.

Vehicle Fitment

This product will fit the following Focus years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account