CJ Classics Disc Brake Conversion Kit With Non-Power Master Cylinder Front Mustang V8 1965-1966/ 1967-1969

Don't try to tackle a huge job like brakes without having everything you'll need for the extensive project! CJ Pony Parts has pulled together absolutely everything you'll need to convert your old drum brakes in this Front CJ Classics Disc Brake Conversion Kit with Non-Power Master Cylinder! Order your kit today!

Conversion Kit Includes:
- 1" Bore Cast Iron Master Cylinder
- Ford Style Teardrop Casting (#227161)
- Zinc Plated Master Cylinder Lid
- Master Cylinder Rod
- Master Cylinder Linkage
- Adjustable Proportioning Valve With 3/8 Ports
- Pair of 4-Piston Calipers
- Pair of Standard Rotors
- Pair of Caliper Brackets
- Front Brake Pads (Pre-Installed)
- Pair of Rubber Brake Hoses
- Wheel Bearings
- Seals
- Pair of Dust Caps
- Mounting Hardware
- Pair of Dust Shields

*This Master Cylinder will work with Disc Front Brakes and Drum Rear Brakes.
*This Master Cylinder will work with both automatic and manual transmissions.
*The smallest wheel you can install on this Disc Brake Conversion kit is a 14"x7".

We've pulled together everything you'll need to convert your classic pony's old drum brakes into modern disc brakes and paired it all up with a high-quality Ford Master Cylinder! You don't want to have to search high and low for the perfect non-power cylinder to make your new front disc brakes run properly, so CJ's has taken the time to sourch the perfect parts just for your Mustang's application. You'll receive everything you need to convert your front brakes, down to the simple hardware and hoses, so no extra trips to the local auto parts store will be needed! What are you waiting for? Grab your full conversion kit from CJ's today!

Vehicle Fitment:
- 1965-1969 Mustangs with V8 Drum Spindles
- 1967-1969 6-Cylinder Mustangs (Will convert the wheels to 5-Lug)

Please Note: When you Install this Kit on a 1967-1969 6-Cylinder Mustang you will need to purchase 5-Lug Wheels (sold separately).