When you hit the brakes on your 1965-1970 Mustang, does the pedal sink too close to the floor? Are your brakes not as responsive as they used to be? If so, then you probably need to change out a few of the components in your drum brakes. Fortunately, CJ Pony Parts carries this Driver Side Drum Brake Self-Adjuster Kit that will give you everything you need to replace those important drum brake system adjusting parts!
Features & Benefits:
- Makes Sure the Drum Brake Adjustments Happen at the Correct Intervals
- Helps Improve Performance and Life Span of Your Mustang's Driver Side Braking System
- Comes with All You Need to Replace Important Drum Brake System Adjusting Parts
- Can Be Used on Front or Rear Drum Brakes
This Driver Side Drum Brake Self-Adjuster Kit will help ensure your Mustang's drum brake adjustments happen at the correct intervals. This kit will help improve the performance and life span of your Mustang's driver side braking system. You'll get everything you need to replace the vital drum brake system adjusting parts to ensure safe and smooth braking! Over time, the brake shoes in your drum brakes can wear down and end up too far from the brake drums to do their job effectively. When this happens, you'll notice that your brake pedal is sinking closer to the floor than usual and that your brakes aren't engaging as fast as usual. This results in less effective brakes that will take longer to stop your Mustang. With this kit, you can correct these problems and ensure your brakes will work when you need them the most! This kit can be used on either the front or rear driver side drum brakes.
This Kit Includes:
- Adjusting Screw
- Cable Guide
- Self-Adjuster Cable
- Adjusting Lever
- Retaining Ring
- Self-Adjusting Hole Rubber Plug
*This kit is also included with deluxe brake hardware kits and drum brake rebuild kits.