Edelbrock Top End Engine Kit Performer RPM 506 HP 429/460


Edelbrock 506 HP Performer RPM Top End Engine Kit for 429 and 460 Engines.

If you're looking to really get the most performance out of your Mustang's 429 or 460 engine, than this comprehensive Edelbrock 506 HP Performer RPM Top End Engine Kit (2045) is exactly what you need! Order yours today from CJ Pony Parts!

Performer RPM Top End Engine Kit Includes:
- Performer RPM Camshaft
- Pair of Performer RPM Cylinder Heads
- Set of Hydraulic Flat Tappet Lifters
- Set of Valve Springs and Retainers
- Satin RPM Air-Gap Intake Manifold
- Performer Link True Roller Timing Chain Set
- Pair of Performance Head Gaskets
- Pair of Performance Intake Manifold Gaskets
- Pair of Performance Header Gaskets
- Intake Manifold Bolt Kit
- Cylinder Head Bolt Kit

Your vehicle's big block Ford engine has some pretty awesome power, but if you're ready for an overhaul and increase in performance, than this complete top end kit is calling your name! This Edelbrock top end kit consists of dyno-matched components to bring you both a complete and affordable all-in-one package. You'll receive a pair of Performer RPM cylinder heads, a brand-new upgraded camshaft with hydraulic flat tappet lifters, a timing chain set, and Edelbrock's RPM Air-Gap intake manifold. All of these high-end components will provide you with 506HP and 536 Torque, so you'll have even more power underneath the hood. Edelbrock has taken all of the guesswork out of what parts and pieces your big block engine needs with this all-encompassing kit. Go ahead and grab yours from CJ's now!

Performer RPM Cylinder Head Specs:
- Combustion chamber volume: 95cc
- Intake runner volume: 292cc
- Exhaust runner volume: 100cc
- Intake valve diameter: 2.19"
- Exhaust valve diameter: 1.76"
- Valve stem diameter: 11/32"
- Valve guides: Manganese bronze
- Deck thickness: 5/8"
- Valve spring diameter: 1.55"
- Valve spring maximum lift: .700"
- Rocker stud: 7/16"
- Guideplate: Hardended steel
- Pushrod diameter: 3/8"
- Valve angle: TBD
- Exhaust port location: Stock
- Spark plug fitment: 14mm x 3/4 reach, gasket seat

Valve  Lift   .100"   .200"   .300"   .400"   .500"   .600"   .700"
Intake    76   140    207    260    300    319    326
Exhaust    67   180    153    180    200    207    207

*The Performer RPM Cylinder Heads require the use of 3/8" diameter pushrods.

Camshaft Features:
- Designed specifically for high-performnace, street applications
- 10-12 inches of manifold vacuum at idle
- Provides p ower between 1500rpm to 6500rpm
- Includes hydraulic flat tapped lifter

Camshaft Specs:
- Duration @ .050 Int/Exh: 234°/244°
- Lift @ Valve Int/Exh: .556"/.581"
- Lobe Seps.: 108°
- Intake Center Line: 103°
- Idle Vac. @ 1000rpm: 12"

Performer-Link True-Roller Timing Chain Set Features:
- Solid Bushing Chain
- Eliminates Chain Stretch
- Cam Sprocket is made from Cast Iron has 35,000 psi Tensile Strength
- Crank Sprocket is made from billet SAE-1144 Steel that is Heat Treated
- Three Keyway Setting Points

Please Note: Pushrods are NOT included in this Edelbrock RPM Top End Kit.

Order this complete Edelbrock (2045) 506 HP Performer RPM Top End Engine Kit for your 429 or 460 Engine from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:

  • 1965 and older U.S. manufactured California certified vehicles
  • 1967 and older U.S. manufactured federally certified vehicles

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.