Exhaust Manifold Stud And Nut Kit For Reproduction Exhaust Manifold 170/200 1965-1967
- Direct-Fit Replacement
- Attaches Manifolds
- Includes Studs And Nuts
- Fits 1965-1967 Mustang
Exhaust Manifold Stud and Nut Kit for all 1965, 1966 and 1966 Mustangs with a 170 or 200 Engine and a Reproduction Exhaust Manifold.
If you're looking to replace the exhaust manifold on your classic 1965-1967 Mustang with a 170 or 200 Engine with a reproduction exhaust manifold this Exhaust Manifold Stud and Nut Kit will cover your hardware needs. This hardware is required to connect your exhaust head pipe to the exhaust manifold.This kit includes two 7/16 studs and two brass 7/16 nuts. The studs and nuts attach your pony's exhaust to the reproduction exhaust manifold.
If you're replacing your old, worn-out factory parts with new ones, then you should definitely take the time to order new hardware too. So when you're replacing or repairing your reproduction exhaust, make sure you can properly attach it to your classic Mustang with this Exhaust Manifold Stud and Nut Kit!
- Two 7/16” studs
- Two 7/16” brass nuts
Please Note: This Exhaust Manifold Stud and Nut Kit may not fit reproduction exhaust manifolds that may require a larger than 7/16” stud. Will not fit original exhaust manifolds that use 3/8” to 3/16” studs.
Order this Exhaust Manifold Stud and Nut Kit for your 1965, 1966 or 1967 Mustang with a 170 or 200 Engine and a Reproduction Exhaust Manifold today from CJ Pony Parts.
California Residents: Proposition 65 Warning