Export Brace Mounting Hardware Stainless 1965-1966

AMK Products:

F-3839

Export Brace Mounting Hardware Stainless 1965-1966 is rated 3.6 out of 5 by 5.

Highlights

OEM-Style Replacement
32-Piece Kit
Factory Specs And Dimensions
Premium-Quality Stainless

MSRP $21.99

$18.99

You save 14%

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Product Description

AMK Products Export Brace Mounting Hardware Kit for 1965-1966 Mustangs.

If you're working on the suspension of your classic 1965-1966 Mustang, than you'll definitely need some new hardware to secure everything into place. Whether you're using an original or aftermarket export brace, it's never a good idea to re-use rusted hardware. This new hardware kit from AMK Products features premium-quality stainless steel pieces constructed to exact factory specs and dimensions, so you know everything will be a perfect fit. Safely secure your export brace to your pony's cowl and shock towers without having to worry about rust or corrosion in the future with this hardware kit today from CJ's!

*This complete 32-piece kit will secure your pony's export brace to the cowl as well as the driver side and passenger side shock tower.

You can buy dozens of new parts for your Mustang. However, many of these new parts won't come with the appropriate hardware, or will expect you to reuse your old, rusted out hardware pieces. Well, if you're in either situation, the wide selection of AMK Products offered by CJ Pony Parts can fill the void and easily allow you to install your new Mustang parts with fresh, shiny, new hardware.

Order this complete AMK Products (F-3839) Export Brace Mounting Hardware Kit for your 1965-1966 Mustang today from CJ Pony Parts!

Installation & Fitment

Vehicle Fitment

This product will fit the following Mustang years:

Reviews

Rated 2 out of 5 by DTOMALA from Only 8 Bolts & Nuts Kinda sucks that I am short 2 Bolts, 4 Washers, and 2 lock nuts. Quality is very nice - on the Stainless, but I think I am shy some pieces.. Picture is correct but shame on me for not counting every item in the picture. I thought it would be a COMPLETE kit, especially for 20 bucks. 4 crossmember bolt holes and 3 bolt holes on each shock tower on my 65. Am I missing something CJ? I would look elswhere for hardware.

Date published: 2016-12-30

Rated 5 out of 5 by Woodzman from Original Style Export Brace I gather the poor reviews are due to this set of bolts being used for the wrong application, although the 'Reviewers' fail to mention as to what they are using these bolts for! I stripped, then chromed the original style export brace(s) and shock tower brackets that came with my '66 Coupe. These bolts (set of 8), are for the cowl and the original shock tower brace that extends from the apron -- these bolts are NOT for the shock tower brackets. Although these stainless steel bolts are not as shiny as the ones shown in the picture, they look great with the newly chromed pieces I mentioned earlier. If you've modified your car with an aftermarket export brace, only 4 of these bolts will be needed (cowl area). Either way, you still need to purchase the correct bolt kit for the shock tower brackets. Hopefully this review helps to clear up as to what this bolt kit is to be used for.

Date published: 2020-01-15

Rated 1 out of 5 by Ride away from Export brace mounting harware. These are nice quality SS bolts with locking nuts. 4 will work to mount on the cow not sure where the other 4 should go, they will not work on the brace shock tower end.

Date published: 2018-03-19

Rated 5 out of 5 by Elfranko from Nice Fastnets Just bought these for my export brace. They look great. Only 4 bolts are required for the Cal, not sure why 8 are provided.

Date published: 2017-10-05

Rated 5 out of 5 by Timco from Looks Great Adding these to my new chrome export brace was almost a no-brainer. They look great and add to the neat appearance.

Date published: 2015-03-26

Questions

Not sure why left pic shows 8 bolts,10 nuts,10 wash & rt pic shows 8 bolts, 8 nuts 16 wash when desc reads "This complete 32-piece kit ". Need at least 10 bolts to properly mount. Could you please detail exactly what comes in this kit?

Asked by: rigatoni

This is a 32 piece kit, The one image was wrong. It includes 8 nuts and bolts and 16 washers.

Answered by: rk cjpp

Date published: 2019-06-11

We can display the most accurate stock information and shipping prices if you enter your shipping zip/postal code, country, and state/province below.

Country

Region

Postcode

Export Brace Mounting Hardware Stainless 1965-1966

Vehicle Fitment

Not sure why left pic shows 8 bolts,10 nuts,10 wash &amp; rt pic shows 8 bolts, 8 nuts 16 wash when desc reads &quot;This complete 32-piece kit &quot;. Need at least 10 bolts to properly mount. Could you please detail exactly what comes in this kit?

Not sure why left pic shows 8 bolts,10 nuts,10 wash & rt pic shows 8 bolts, 8 nuts 16 wash when desc reads "This complete 32-piece kit ". Need at least 10 bolts to properly mount. Could you please detail exactly what comes in this kit?