Fuel Tank Kit EFI 16 Gallon With Sending Unit/ 190 LPH Fuel Pump Mustang 1965-1968

CJ's Part Number:
92% of 100


  • Supports up to 450 Horsepower
  • Corrosion Resistant
  • Zinc-Plated Sending Unit
  • Includes Rubber Filler Hose
MSRP $506.97
You save $17.48

EFI 16 Gallon Fuel Tank Kit with a Sending Unit and 190 LPH Fuel Pump for 1965, 1966, 1967 and 1968 Mustangs.

Update your classic 1965-1968 Mustang's fuel system with this all-new EFI 16 Gallon Fuel Tank Kit with a Sending Unit and 190 LPH Fuel Pump from CJ Pony Parts! This fuel tank kit is electronic fuel injection ready and comes with everything you need to really get the fuel flowing. With higher demands of power from your Mustang, switching to a fuel-injected application is the best way to get a top-quality level of performance out of your engine.

Features and Benefits:
- Made of Galvanized Steel
- 16-Gallon Fuel Capacity
- 10-Gauge Mounting Plate
- EFI-Style Internal Baffling 

The main feature of this kit is the brand new 16 gallon, electronic fuel injection ready fuel tank. The fuel tank has an overall size of 32-3/4" x 24-1/2" x 7-1/2" and is made of durable, corrosion-resistant galvanized steel. On the inside of the fuel tank there is EFI-style internal baffling which features an extra-large, 4.3-liter fuel tray to aid in preventing fuel starvation during acceleration and cornering. Best of all, this aftermarket fuel tank is a direct, drop-in replacement that uses the factory mounting holes and original style hardware for installation.

The fuel sending unit included with this fuel tank kit is a 73-10 ohm fuel sending unit that will work with your original, factory-style fuel gauge. The sending unit is designed with a rheostat that is made of high-quality ceramic board, and the fuel sending unit itself is zinc plated to be more resistant to corrosion. A new rubber filler hose is also provided with the fuel tank kit.

Kit Includes:
- 16 gallon, EFI ready fuel tank
- GPA-Series 190 LPH Walbro fuel pump module
- 73-10 ohm fuel sending unit
- Filler hose
- Roll over vent valve

*Does not include supply or return lines from fuel tank to engine.

The fuel pump included with this kit is a GPA-Series 190 LPH Walbro fuel pump module that can support up to 450 horsepower and provides 190 liters per hour of fuel flow. A heavy-duty, yellow-zinc plated 10-gauge mounting plate helps to prevent the fuel pump module from warping and corroding. It contains the correct fittings for the supply, return, vent and electrical connector. The fuel pump module also includes an internal wiring harness filter sock and insulator sleeve.

Please Note: A Roll Over Vent Valve is included with this tank, this is an optional component that is not required if you are using a vented cap.

California Residents: Proposition 65 Warning

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.
Complete Your Package
Add to Cart