Hawk Performance Brake Pad HPS 5.0 Kit Front/ Rear Mustang V6/ GT 2005-2010

CJ's Part Number:
BS19K

Highlights

  • Complete Front/Rear Kit
  • Ferro-Carbon Compound
  • Rotor Friendly
  • Made in the USA
MSRP $322.98
$271.78
You save 16%

Hawk Performance HPS 5.0 Front and Rear Brake Pad Kit for 2005, 2006, 2007, 2008, 2009 and 2010 V6 and GT Mustangs.

Everyone knows that the ability to reach high speeds is critical to successful track day performance, but don't indulge in an autocross or track day without a complete set of front and rear high-performance Brake Pads. Hawk Performance HPS (High Performance Street) 5.0 Brake Pads were designed to handle the heat of the track and get you home safely afterward, too. With these Brake Pads, you'll experience shorter stopping distances while maximizing performance under heavy braking conditions. Show your support for these American-made Brake Pads from Hawk Performance, a streetcar-friendly choice for your 2005-2010 V6 or GT Mustang. 

Features and Benefits:
- Complete Front and Rear Brake Pad Kit for Driver and Passenger Sides
- Extended Pad Life with Low Levels of Brake Dust
- Improved Pedal Feel and Minimal Brake Fade
- Increased Stopping Power while Being Gentle on Rotors
- Virtually Noise-Free with High Friction Hot or Cold
- Proudly Manufactured in the USA!

A high-performance race compound, Ferro-Carbon blends the safety of aerospace design with proven motorsports tech. With the HPS 5.0, Hawk Performance achieved better pedal feedback and extremely quiet operation, along with improved brake torque and dust control. 

Kit Includes:
- Set of HPS 5.0 Front Brake Pads (HB484B.670)
- Set of HPS 5.0 Rear Brake Pads (HB485B.656)

The HPS 5.0 is not merely a replacement for Hawk's currents HPS product. Rather, HPS 5.0 stands on its own, providing your Mustang with a change in driving feel that really allows you to challenge yourself. The HPS 5.0 is the premium replacement pad for your Mustang.

Vehicle Fitment:
- 2005-2010 V6 Mustangs
- 2005-2010 GT Mustangs

*Does NOT fit GT500 Mustangs.

Tech Tip: Hawk Performance burnishes its brake pads as a final step in the factory, but all brake pads have to be bedded-in with the rotors (new or used) that they will be used against. Properly bedding-in new brake pads results in a transfer film being generated at the pad and rotor interface to maximize brake performance.

California Residents: Proposition 65 Warning

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.