Inner Tie Rod End Driver Side Power Steering Mustang V8 1965-1966
- Direct-Fit Replacement
- High-End Reproduction Quality
- Includes Mounting Hardware
- 65-66 V8 Mustangs
Driver Side Inner Tie Rod End for all 1965-1966 Mustangs with a V8 Engine and Power Steering.
Over time, ball joints wear out. If your Mustang is rolling on severely worn ball joints, you'll notice sloppy, inconsistent steering. Don't settle for it! These Reproduction Inner Tie Rods from CJ Classics feature brand-new greaseable ball joints for extended life and improved steering!
Features and Benefits:
- Repairs Worn Out Ball Joints
- Brand New Replacement
- Greaseable Ball Joints
- For Power Steering
This Driver Side Inner Tie Rod End comes with a castle nut, grease fitting, dust boot and cotter pin. If you're replacing steering components on your classic 1965-1966 Mustang, then you should look into a new Driver Side Inner Tie Rod End! It's connected to the outer tie rod by a tie rod end sleeve. It connects the driver side to the steering center link on Mustangs with power steering.
Please Note: This Driver Side Inner Tie Rod End is meant for 1965-1966 Mustangs that have a V8 engine and power steering.
California Residents: Proposition 65 Warning
Intermediate skill is required for this installation.