Tie Rod End Outer Driver Side Power Steering V8 1965-1966
Driver Side Outer Tie Rod End for all 1965-1966 Mustangs with a V8 Engine and Power Steering.
If the steering in your 1965-1966 Mustang is starting to go, it's usually pretty obvious. You'll hear funny noises or the steering will feel sloppy. One of the first things you should check is your driver side outer tie rod end. Over time, this part can become damaged thanks to everyday wear and tear. If you can, jack up your Mustang so the front wheels are off the ground. Then rock the tire from side to side. If you feel any play, then chances are your tie rods need to be replaced. Good thing CJ Pony Parts sells this high-quality Driver Side Outer Tie Rod End!
Features and Benefits:
- LH Side Specific
- Direct-Fit Reproduction
- Includes Tie Rod, Castle Washer, Grease Fitting, Dust Boot and Cotter Pin
This Driver Side Outer Tie Rod End attaches to your Mustang's spindle and the inner tie rod through a tie rod sleeve. You'll get a tie rod, castle washer, grease fitting, dust boot and cotter pin with your order.
Please Note: This Driver Side Outer Tie Rod End is meant for 1965-1966 Mustangs that have a V8 engine and power steering.
Beloved the world over as a true American classic from the beginning, the Mustang has proven itself to be a formidable basis for some serious performance upgrades. It’s why, here at CJ Pony Parts, we do our best to bring together as many parts and accessories from some of the top suppliers. We know you want the best in Mustang performance!
Order a Driver Side Outer Tie Rod End for your 1965-1966 Mustang with a V8 Engine and Power Steering from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Intermediate skill is required for this installation.