Interior Courtesy Light Assembly Rear Fastback 1965-1968

Same Day Shipping on Automotive Parts
CJ's Part Number: FCL1
MSRP: $38.99
CJ's Low Price:
$32.99
1558656000 14870
Earn 16 RPM Points What's this?
Interior Courtesy Light Assembly Rear Fastback 1965-1968
Interior Courtesy Light Assembly Rear Fastback 1965-1968 Interior Courtesy Light Assembly Rear Fastback 1965-1968

Product Description

Interior Rear Courtesy Light Assembly for all 1965, 1966, 1967 and 1968 Fastback Mustangs.

If you're fixing up a 1965-1968 Mustang Fastback, one of the easiest things to fix is the interior dome light. Not only does this light illuminate your Mustang's interior when it's dark outside, but it's also a great safety feature too! So make sure you keep your Fastback's interior looking its best with this beautiful reproduction courtesy light assembly, now available from CJ Pony Parts!

Features and Benefits:
- Individually Sold
- Premium Quality Build
- Directly Fitting your LH or RH Side

This Interior Rear Courtesy Light Assembly mounts to the rear interior quarter panel trim, and it will fit either the driver side or passenger side of your Mustang. You'll get one light assembly with your order, and your Mustang will require two.

Light Assembly Includes:
- Body
- Bulb
- Lens
- Wiring

Please Note: This interior rear courtesy light assembly is for Fastback models only.

Whether you’re looking for an exterior mirror, wheels and tires, headlights and taillights or a set of interior upholstery, CJ’s has the parts you need to complete your classic Mustang restoration with ease! CJ’s has the parts you need to bring your early model Mustang build back to life--browse our huge selection of restoration parts for your pony today!

Order an Interior Rear Courtesy Light Assembly for your 1965, 1966, 1967 or 1968 Fastback Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Dome Lights  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
Interior Courtesy Light Assembly Rear Fastback 1965-1968 is rated 1.8 out of 5 by 4.
Rated 1 out of 5 by from They don't fit correctly They don't fit correctly. The red arrows show the four pints where the chrome front is attached. When install these four points keep the lamp from fitting flush. Also the two that I received have the wrong pigtail for the 1965 fastback that I had ordered them for. The Scott Drake units had the correct pigtails and mount flush.
Date published: 2016-06-13
Rated 3 out of 5 by from they will work I bought these today even thought they have a bad review. they are a bit different then originals but what i found is they have for nipples around the outer edge that does not allow them to sit flush. The options are cut the nipples off, modify the fiberglass to allow them to fit,it will not be seen, or return them and hope the scott drakes fit better. as for the pigtail being incorrect its two wires in one plug factory wiring wil plug into it making the bad review of the pigtail a moot point
Date published: 2017-06-14
Rated 2 out of 5 by from Modified to fit Good looking light. I had the same problem as earlier posts. The four tabs that hold the mounting ring to the base of the light stick up and don't let the light mount flush. I just took a pair of cutters and snipped the tabs off lower and everything fit just fine. I didn't have to make my quarter panel hole bigger either. Mine is a (December 1964 built) '65 fastback.
Date published: 2017-03-02
Rated 1 out of 5 by from Terrible part - junk It is produced with four pins that prevent it from seating correctly so unless you modify the panel it won't sit flush.
Date published: 2017-03-15
  • y_2019, m_5, d_24, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_FCL1, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 32.17ms
  • REVIEWS, PRODUCT

Product Questions

the pair that I received have 4 points on the backside that my OE do not have. Am I to cut my interior panels or remove these position point from these new lights?

Asked by: svobob
I am not sure what the protrusions are you are referring to, Please send some pics to KHILTZ@CJPONYPARTS.COM, we will take a look and see if there is an issue.
Answered by: rk cjpp
Date published: 2017-09-08

Can you provide dimensions?  What size hole is required?

Asked by: JohnB1967Mustang
The required hole size is 1.5 inches.
Answered by: rk cjpp
Date published: 2016-02-19

who made this light

Asked by: dirty
This is unbranded.
Answered by: CJ Pony Parts
Date published: 2019-02-25
  • y_2019, m_5, d_24, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_FCL1, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 31.57ms
  • QUESTIONS, PRODUCT

You Might Also Like