JMS Fuel Pump Voltage Booster PowerMAX V2 FuelMAX Dual Output GT500 2013-2014
JMS PowerMAX V2 FuelMAX Dual Output Fuel Pump Voltage Booster for 2013-2014 GT500 Mustangs.
No matter what power option you went with to upgrade your 2013-2014 GT500 Mustang, this JMS PowerMAX V2 FuelMAX Dual Output Fuel Pump Voltage Booster is the perfect solution to keeping your factory fuel pump. The last thing you want is your new power-boost to kill your Pony's engine. That's why JMS designed this voltage booster, so you can keep your stock pump without harming the rest of your engine.
JMS manufactures this fuel pump booster (P2020PPS13) in the USA with high quality parts for lasting durability and ensured fit and function. It can support up to 1,000 horsepower with your stock pump and increases the output by up to 85 percent. While making sure your engine doesn't starve, it also corrects and eliminates fuel pressure spikes. JMS' booster is compatible with 16V and 12V battery systems and is perfect for all kinds of power upgrades you may have added to your Mustang.
Installation instructions and hardware are included for your convenience. This voltage booster connects to your factory fuel pump's +12V DC feed wire. It's specifically designed for 2013-2014 GT500 Mustangs and is not equipped to work with other models. The straight forward plug-n-play installation design means you can save time and hassle in the garage and get back onto the road.
Fuel Pump Voltage Booster Features and Benefits:
- Increase Fuel Pump Output by up to 85%
- Connects to Existing Fuel Pump Driver +12V DC Feed Wire
- Adjust the Voltage Ramp In/Ramp Out Time
- Correct and Eliminate Fuel Pressure Spikes
- Provides Voltage Boosting VIA Accelerator Position
- Can Support up to 1,000hp with the Stock Fuel Pumps
- Perfect for all Power Adder Options
- LEDs Help to Visually Monitor the Device Status
- Boosts and Regulates Voltage to 14.4V
- MAF/MAP/TPS or Ground Activation
- Compatible with all 12V or 16V Battery Systems
- Made in the USA
- Straight-forward Plug and Play Installation
- 2013-2014 Shelby GT500 Mustang
- 44 Amp PowerMAX v2 FuelMAX Fuel Pump Voltage Booster
- Single Output Plug-and-Play Wiring and Pedal Harness
- Installation Kit and a Set of Instructions
Installation Kit Contains:
- Hobbs Switch Preset @ 5psi (user adjustable 3-7psi)
- Fitting 1/8NPT Female to 3/16" Male Barb
- Vacuum Tee 3/16" x 3/16" x 3/16"
- Vacuum Tee 1/4" x 1/4" x 3/16"
- Vacuum Tee 3/8" x 3/8" x 3/16"
- 1 Ft. of 5/32" Vacuum Hose
- 30 Amp Mini-Fuse
- 10/12 Gauge Heat Shrink Butt Splices with Solder (2)
- #8 Stud 18/22 Gauge Wire Heat Shrink Ring Terminal (2)
- 10 Gauge Heat Shrink Ring Terminal
- Self Drilling Hex Screws and a Mini Screw-Driver (6)
- Zip Ties (6)
Please Note: Plug and Play system is designed for use with the Dual OEM Fuel Pump Driver Modules.
Order this JMS (P2020PPS13) PowerMAX V2 FuelMAX Dual Output Fuel Pump Voltage Booster for your 2013 or 2014 GT500 Mustang from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Intermediate skill is required for this installation.