JMS Fuel Pump Voltage Booster PowerMAX V2 FuelMAX Single Output V6/GT 2011-2014/Boss 302 2012-2013

JMS:
P2000PPM11
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 132.35ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
$489.00

JMS PowerMAX V2 FuelMAX Single Output Fuel Pump Voltage Booster for all 2011, 2012, 2013 and 2014 V6 and GT Mustangs and 2012-2013 Boss 302 Mustangs.

Don't risk starving your engine after you take your 2011-2014 V6 or GT Mustang or your 2012-2013 Boss 302 Mustang to the next level. Get this PowerMAX V2 FuelMAX Single Output Fuel Pump Voltage Booster from JMS. PowerMAX has been setting the standards for world-class Boost-A devices since 2010. With this Fuel Pump Booster, you'll get both clean continuous voltage and the highest available amperage on the market.

JMS PowerMAX V2 FuelMAX Fuel Pump Voltage Booster Features and Benefits:
- Increases Fuel Pump Output by up to 85%
- Connects to Existing Fuel Pump Driver +12V DC Feed Wire
- Adjust the Voltage Ramp In/Ramp Out Time
- Correct and Eliminate Fuel Pressure Spikes
- Provides Voltage Boosting VIA Accelerator Position
- Can Support up to 750hp with the Stock Fuel Pump
- Perfect for all Power Adder Options
- LEDs Help to Visually Monitor the Device Status
- Boosts and Regulates Voltage to 14.4V
- MAF/MAP/TPS or Ground Activation
- Compatible with ALL 12V or 16V Battery Systems
- Made in the USA
- Straight-forward Plug & Play Installation

This JMS fuel pump voltage booster (P/N: P2000PPM11) works with your Mustang's factory single output fuel pump, so you don't have to replace it after adding the power you desire. It can support up to 750 horsepower with your stock pump and is perfect for all power-adding options. This booster is compatible with all 12V and 16V battery systems. Installation is easy thanks to the plug-n-play design. It will increase your fuel pump output by 85% while correcting/eliminating fuel pressure spikes. JMS manufactures this voltage booster in the USA for quality and fitment assurance.

Fitment:
- 2011-2014 Mustang V6
- 2011-2014 Mustang GT
- 2012-2013 Mustang Boss 302

Kit Includes:
- 44 Amp PowerMAX v2 FuelMAX Fuel Pump Voltage Booster
- Single Output Plug & Play Wiring and Pedal Harness
- Installation Kit and a Set of Instructions

Installation Kit Contains:
- Hobbs Switch Preset @ 5psi (user adjustable 3-7psi)
- Fitting 1/8NPT Female to 3/16" Male Barb
- Vacuum Tee 3/16" x 3/16" x 3/16"
- Vacuum Tee 1/4" x 1/4" x 3/16"
- Vacuum Tee 3/8" x 3/8" x 3/16"
- 1 Ft. of 5/32" Vacuum Hose
- 30 Amp Mini-Fuse
- 10/12 Gauge Heat Shrink Butt Splices with Solder (2)
- #8 Stud 18/22 Gauge Wire Heat Shrink Ring Terminal (2)
- 10 Gauge Heat Shrink Ring Terminal
- Self Drilling Hex Screws and a Mini Screw-Driver (6)
- Zip Ties (6)

Please Note: Plug and Play system is designed for use with the OEM Fuel Pump Driver Module.

Order this JMS (P2000PPM11) PowerMAX V2 FuelMAX Single Output Fuel Pump Voltage Booster for your 2011, 2012, 2013 or 2014 V6 or GT Mustang or your 2012 or 2013 Boss 302 Mustang from CJ Pony Parts today!

Installation Difficulty

Moderate
Moderate

Intermediate skill is required for this installation.

Installation Videos

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 10.12ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 136.24ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
Complete Your Package
Add to Cart