JMS Fuel Pump Voltage Booster PowerMAX V2 FuelMAX Single Output GT/V6 2005-2010

MSRP $573.95
You save 13%

JMS PowerMAX V2 FuelMAX Single Output Fuel Pump Voltage Booster for all 2005, 2006, 2007, 2008, 2009 and 2010 GT and V6 Mustangs.

If you've added power to your 2005-2018 GT or V6 Mustang, then you may have considered replacing your fuel pump with one better equipped to handle the amped voltage. CJ Pony Parts is here to offer a simpler solution! By installing this JMS PowerMAX V2 FuelMAX Single Output Fuel Pump Voltage Booster, you can keep your stock pump and increase your output so your engine won't starve. Installation is simple with the included hardware and instructions. This booster connects to your existing fuel pump driver +12V DC feed wire.

This voltage booster (P/N: P2000PPM05) is one in JMS' line of Boost-A devices, which have set the quality and performance standard on the market since 2010. You'll get clean continuous voltage and the highest possible amperage, making it a great solution for all power-adder options. This booster will increase your fuel pump output by 85% while correcting and eliminating fuel pressure spikes. It can support up to 750 horsepower using your factory fuel pump. JMS manufactures their boosters right here in the USA for quality, fit and function assurance.

PowerMAX V2 FuelMAX Fuel Pump Voltage Booster Features and Benefits:
- Increase Fuel Pump Output by up to 85%
- Straight-forward Plug-and-Play Installation
- Connects to Existing Fuel Pump Driver +12V DC Feed Wire
- Adjust the Voltage Ramp In/Ramp Out Time
- Correct and Eliminate Fuel Pressure Spikes
- Provides Voltage Boosting VIA Accelerator Position
- Can Support up to 750hp with the Stock Fuel Pump
- Perfect for all Power Adder Options
- LEDs Help to Visually Monitor the Device Status
- Compatible with all 12V or 16V Battery Systems
- Boosts and Regulates Voltage to 14.4V
- MAF/MAP/TPS or Ground Activation
- Made in the USA

- 2005-2010 Mustang V6
- 2005-2010 Mustang GT

Kit Includes:
- 44 Amp PowerMAX v2 FuelMAX Fuel Pump Voltage Booster
- Single Output Plug & Play Wiring and Pedal Harness
- Installation Kit and a Set of Instructions

Installation Kit Contains:
- Hobbs Switch Preset @ 5psi (user adjustable 3-7psi)
- Fitting 1/8NPT Female to 3/16" Male Barb
- Vacuum Tee 3/16" x 3/16" x 3/16"
- Vacuum Tee 1/4" x 1/4" x 3/16"
- Vacuum Tee 3/8" x 3/8" x 3/16"
- 1 Ft. of 5/32" Vacuum Hose
- 30 Amp Mini-Fuse
- 10/12 Gauge Heat Shrink Butt Splices with Solder (2)
- #8 Stud 18/22 Gauge Wire Heat Shrink Ring Terminal (2)
- 10 Gauge Heat Shrink Ring Terminal
- Self Drilling Hex Screws and a Mini Screw-Driver (6)
- Zip Ties (6)

Please Note: Plug and Play system is designed for use with the OEM Fuel Pump Driver Module.

Order this JMS (P2000PPM05) PowerMAX V2 FuelMAX Single Output Fuel Pump Voltage Booster for your 2005, 2006, 2007, 2008, 2009 or 2010 GT or V6 Mustang from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Note: This item is not CARB (California Air Resource Board) exempt and is not legal for sale or use in the state of California.

Installation Difficulty


Intermediate skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account