JMS Fuel Pump Voltage Booster PowerMAX V2 FuelMAX Single Output Mustang V6 2015-2017/ EcoBoost/ GT 2015-2022
- Increase Fuel Pump Output
- Plug-N-Play Installation
- For 2015-2022 Mustangs
- Made In The USA
JMS PowerMAX V2 FuelMAX Single Output Fuel Pump Voltage Booster for all 2015, 2016 and 2017 V6 Mustangs and 2015, 2016, 2017, 2018, 2019, 2020, 2021 and 2022 EcoBoost and GT Mustangs.
If you've upgraded your 2015-2021 Mustang for some extra power and performance, then you need to make a decision: replace your factory fuel pump or enhance it and save yourself a ton of time and hassle! CJ Pony Parts offers this PowerMAX V2 FuelMAX Single Output Fuel Pump Voltage Booster from JMS (P2000PPM15) to increase your fuel pump's output so your engine won't stave. It's designed for V6, EcoBoost and GT models and is perfect with all power adder options.
Features and Benefits:
- Increase Fuel Pump Output by up to 85%
- Connects to Existing Fuel Pump Driver +12V DC Feed Wire
- Adjust the Voltage Ramp In/Ramp Out Time
- Correct and Eliminate Fuel Pressure Spikes
- Provides Voltage Boosting VIA Accelerator Position
- Can Support up to 750hp with the Stock Fuel Pump
- Perfect for all Power Adder Options
- LEDs Help to Visually Monitor the Device Status
- Boosts and Regulates Voltage to 14.4V
- MAF/MAP/TPS or Ground Activation
- Compatible with all 12V or 16V Battery Systems
- Made in the USA
- Straight-forward Plug & Play Installation
By adding this voltage booster to your Mustang, you can keep your stock fuel pump despite your power upgrades. It increases your pump's output up to 85 percent and can support up to 750 horsepower. This booster will also correct and eliminate fuel pressure spikes and boost/regulate your voltage to 14.4V. JMS manufactures this voltage booster in the USA for quality, fit and function assurance. It connects to your fuel pump's existing driver +12V DC feed wire and comes with instructions and installation.
- 2015-2017 Mustang V6
- 2015-2022 Mustang EcoBoost
- 2015-2022 Mustang GT
- 44 Amp PowerMAX v2 FuelMAX Fuel Pump Voltage Booster
- Single Output Plug & Play Wiring and Pedal Harness
- Installation Kit and a Set of Instructions
- Hobbs Switch Preset @ 5psi (user adjustable 3-7psi)
- Fitting 1/8NPT Female to 3/16" Male Barb
- Vacuum Tee 3/16" x 3/16" x 3/16"
- Vacuum Tee 1/4" x 1/4" x 3/16"
- Vacuum Tee 3/8" x 3/8" x 3/16"
- 1 Ft. of 5/32" Vacuum Hose
- 30 Amp Mini-Fuse
- 10/12 Gauge Heat Shrink Butt Splices with Solder (2)
- #8 Stud 18/22 Gauge Wire Heat Shrink Ring Terminal (2)
- 10 Gauge Heat Shrink Ring Terminal
- Self Drilling Hex Screws and a Mini Screw-Driver (6)
- Zip Ties (6)
Please Note: Plug and Play system is designed for use with the OEM Fuel Pump Driver Module.
California Residents: Proposition 65 Warning
Note: This item is not CARB (California Air Resource Board) exempt and is not legal for sale or use in the state of California.
Intermediate skill is required for this installation.