Ken Harrison Radio Speaker In-Dash Upgrade 1965-1966

Ken Harrison:
MU646
Ken Harrison Radio Speaker In-Dash Upgrade 1965-1966 is rated 1.5 out of 5 by 11.
  • y_2019, m_10, d_19, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_US, sid_SPK03, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 188.01ms
  • REVIEWS, PRODUCT

Highlights

  • Center Dash Mounted Speaker
  • 2 Separate 3-1/2" Drivers
  • For Use With Modern Radios
  • Direct-Fit Replacement
$45.99

Ken Harrison In-Dash Upgraded Radio Speaker for all 1965-1966 Mustangs.

If you're upgrading the radio or audio system in your 1965-1966 Mustang, than be sure you have new speakers to support that crisp, clean sound! Pick up this Ken Harrison In-Dash Upgraded Radio Speaker from CJ Pony Parts today!

This upgraded Radio Speaker (MU646) from Ken Harrison requires a modern stereo that has left and right speaker outputs. Stock original radios in 1965-1966 Mustangs have a single speaker output and cannot drive both voice coils in this speaker. Your brand-new, premium-quality speaker is the perfect addition to your classic pony's modernized audio system--be sure to snag yours from CJ's now!

*This radio speaker does NOT include speaker wire for installation.

Ken Harrison is a Mustang industry leader in the production of authentic appearance radio bezels, surrounds and speaker systems, as well as full radio assemblies with modern face plates to bring all of the power and technological advancements of a modern radio in your classic Mustang.

Order this premium Ken Harrison MU646 In-Dash Upgraded Radio Speaker for your 1965 or 1966 Mustang today from CJ Pony Parts!

Vehicle Fitment

This product will fit the following Mustang years:

Rated 2 out of 5 by from Poorly designed I purchased this speaker anticipating that it would fit right in place of the original. Unfortunately, the unit does not fit well with or without the dash pad being in place. I had to remount one of the speakers so the terminals were not directly contacting the metal. I found out the hard way. The original speaker and defroster duct grill does not fit well with this speaker in place. When I have more time I am going to remove the speakers from the preformed board and, somehow, mount them in the original location so the grill will fit properly. Purchase at your own risk.
Date published: 2015-05-10
Rated 1 out of 5 by from Not a replacement This will not replace a factory speaker. It sits too high and wont allow the defrost grill to be put back on properly. Im sure the actual speakers are fine but in a nut shell it wont fit. I bought on the advise of a salesman on the phone when I was ordering other things. Its getting returned. The only thing I have gotten from CJ that didnt fit.
Date published: 2015-11-17
Rated 1 out of 5 by from Terrible Fit I bought these speakers because my daughter really wanted a nice stereo sound. It doesn't fit at all and shorts out against the metal dash. The defrost grill doesn't fit over it either. This one was a bust. Maybe I can use the speakers in another location. Please stop offering this product CJ. I've been very happy with all my other purchases.
Date published: 2015-06-16
Rated 1 out of 5 by from Very bad design does not fit Had to modify to get it to work. Cut speaker hole out some.
Date published: 2015-10-16
Rated 1 out of 5 by from doesn't come close to fitting I know aftermarket parts don't always fit right but i was surprised that this speaker won't fit at all, its too wide, too long and too tall, would require cutting into a pristine original dash. I recommend the aftermarket kick panel and speaker set. I can always put the original kick panels back in. as for the dash speaker...its just an empty hole now.
Date published: 2016-02-10
Rated 1 out of 5 by from Speaker fitment I agree with another posting is which this item should be removed from inventory. Does not fit and would need alot of trimming to install. Grille will not fit overtop and magnets hit metal dash, all the many items i have purchased this is the only one i had a problem with. Poor design. Would not reccomend to others at all.
Date published: 2015-12-29
Rated 1 out of 5 by from Sucks thinking or not I thought this would fit right in the factory hole. No as others in the review it sits to high, wires touch the dash metal. I want to return it. Next time read the reviews before buying.
Date published: 2016-03-16
Rated 5 out of 5 by from Not at all a drop in retrofit. Mounting plate did not fit. Speakers did not fit even with effort to install on old mounting board. This was on a 65 Mustang coupe. It was necessary to modify the dashe sheet metal and fabricate a mounting board. The sound fidelity was inadequate on bass and treble frequencies.
Date published: 2017-02-14
  • y_2019, m_10, d_19, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_US, sid_SPK03, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.94ms
  • REVIEWS, PRODUCT

Can this speaker be used with the RetroSound RSRD30 Hermosa Radio?

Asked by: jpsaravi
Yes it can.
Answered by: rk cjpp
Date published: 2018-05-09
  • y_2019, m_10, d_19, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_SPK03, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 210.07ms
  • QUESTIONS, PRODUCT