March Performance Serpentine Pulley And Bracket Conversion Kit Ultra Style Black Without Air Conditioning And Power Steering 3-Bolt Damper 289/302 1965-1969
- Complete Pulley/Bracket Kit
- Stainless Steel Tension Rods
- 6061-T6 Aluminum Pulleys
- Includes Necessary Hardware
March Performance Black Ultra Style Serpentine Pulley and Bracket Conversion Kit for all 1965, 1966, 1967, 1968 and 1969 289 and 302 V8 Mustangs with a 3-Bolt Crankshaft Damper but without Air Conditioning and Power Steering.
Do you have a 1965-1969 Mustang with a 289 or 302 V8 Engine and a 3-Bolt Damper? Are you looking to modify the style & grace of your engine bay? Then check out March Performance's Black Ultra Style Serpentine Pulley and Bracket Conversion Kit. 100% made in the USA, this kit is manufactured with a cost-effective combination of style and performance that will be sure to be gratifying for Mustang enthusiasts all over.
- Alternator Bracket
- Alternator Fan & Pulley with Nose Cover
- Tensioners & Hardware
- Crankshaft Pulley
- Water Pump Pulley with Nose Cover
- Maintenance-Free Black Powder Coating
Designed to be Used with Original Style Parts Including:
- 3-Bolt Crankshaft Damper
- Water Pump with Passenger Side Outlet
March Performance’s Ultra Style Serpentine Kit is precision CNC machined from solid billet 6061-T6 aluminum to fit perfectly in your Mustang, while handling complete amounts of torque & vibration. Ordering this kit will give you a one-piece alternator bracket that is styled and produces more proper support, while an alternator fan & pulley that comes with a nose cover, is provided to make sure everything runs fluid. The water pump pulley comes with a nose cover as well, and hooks to your water pump on the passenger side. This kit also features a larger diameter crank pulley to aid in the driving of your alternator, A/C and water pump at idle when it truly counts.
You'll also receive stainless steel tensioning rods and moly rod ends for high performance operation. The finished street rod ratio after installed will increase water flow & fan speed, helping at critical low-speed driving. A black powder coating is put on to give it a little more style, and also to eliminate the need to polish everywhere, not just those hard to reach places. The high tensile strength of this upgrade makes for much longer wear and March Performance goes as far as putting a hard coating on the high wear areas of the pulleys.
March Performance also includes all of the mounting hardware you'll need in these kits, along with detailed instructions, so you can correctly install everything yourself.
Please Note: The required belt size for this kit is a single belt that is 38".
This kit will NOT work on Mustangs with Power Steering or Mustangs with Air Conditioning.
March Performance has been an industry leader in both style & performance, and has been serving the Mustang community with expertly crafted engine pulleys & brackets for over 25 years. All of March Performance's pulley and bracket equipment is crafted with a unique mixture of durability, style and performance, providing customers with all of the best aspects of aftermarket Mustang equipment. Look through CJ Pony Parts' inventory of March Performance products to increase the style and performance of the underside of your hood.
Don't wait. Purchase March Performance's Black Ultra Style Serpentine Pulley and Bracket Conversion Kit for your 1965, 1966, 1967, 1968 or 1969 289 or 302 V8 Mustang with a 3-Bolt Crankshaft Damper but without Air Conditioning and Power Steering from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Intermediate skill is required for this installation.