Mishimoto Oil Cooler Kit Silver With Thermostatic Sandwich Plate Mustang GT 2011-2014

Powered by the 5.0L Coyote engine, the 2011-2014 GT Mustang dominates on the street and track. However, aggressive driving conditions may result in high oil temperatures. This is known to cause a drop in oil viscosity, poor lubrication, and early engine wear. Fortunately, Mishimoto's Silver Oil Cooler Kit (MMOC-MUS-11T) can increase oil capacity by 0.75 quarts while reducing oil temperatures by 35 degrees for the best in performance and longevity. 

Features and Benefits:
- Direct-Fit for the 2011–2014 GT Mustang
- Reduces Oil Temperatures By 35-Degrees
- Application-Specific Mounting Bracket
- Preassembled Stainless Steel Braided Oil Lines with Durable -AN Fittings
- Billet Aluminum Thermostatic Oil Sandwich Plate
- 25-Row Stacked-Plate Oil Cooler for Optimal Fluid Temperature Reduction
- Aluminum Construction with Sleek Silver Finish
- Increases Oil Capacity by 0.75 Qt

The Silver Oil Cooler Kit wouldn't be complete without Mishimoto's Thermostatic Sandwich Plate. It's made of billet aluminum with an M22 x 1.5 thread size. Equipped with a rear-mounted thermostat, the sandwich plate delivers quicker oil warm-up and enhanced regulation of oil temperatures in order to meet the demands of your street or track car.

Kit Includes:
- (1) Application Specific Mounting Bracket
- (1) 25-Row Oil Cooler
- (1) 3ft 8in Stainless Steel Braided Hose w/ -10AN Fittings
- (2) 4ft 7.5in Stainless Steel Braided Hose w/ -10AN Fittings
- (1) M22 Thermostatic Sandwich Plate
- (1) Stainless Steel Sandwich Plate Adapter, M22 x 1.5
- (2) M20 x -10AN Straight Fittings
- (2) 1/8" NPT Plugs
- (1) Large O-ring
- (1) Mounting Hardware Set

The Mishimoto direct-fit oil cooler kit will keep you moving on the street, track, drag strip, and drift circuit. Of the kit's several components is an application-specific mounting bracket that attaches to existing points on the front bumper support. This bracket is strategically located to mount a 25-row stacked-plate oil cooler in an area that will maximize airflow and aid in fluid temperature reduction. 

Tech Tip: Recommended Torque Specification for All Straight Fittings and Banjo Bolts: 15-25 Ft/Lbs. Do Not Exceed the Maximum Torque Rating Of 35 Ft/Lbs.

Please Note: Mishimoto Fully Inspects and Cleans All Products Prior To Packaging. However, It Is Recommended That Customers Flush the Oil Cooler with One Quart of Clean Oil Prior To Installation to Remove Any Debris Accumulated During Shipping.