Mishimoto Thermostatic Oil Cooler Kit Silver With Sandwich Plate Focus ST 2013-2018

Ensure the oil coursing through your 2013-2018 Focus ST is cooled to the proper temperature. This Mishimoto (MMOC-FOST-13T) Silver Thermostatic Oil Cooler Kit with a Sandwich Plate keeps your engine running cool at the track, or whenever you put your right foot down.

Features and Benefits:
- For 2013-2018 Focus STs
- Direct-fit replacement
- Application-specific mounting brackets
- Oil cooler location does not interfere with aftermarket air intakes
- Works with stock and all aftermarket front mount intercooler kits
- Pre-made stainless steel braided oil lines with durable -AN fittings
- 19-row stacked-plate oil cooler for optimal fluid temperature reduction
- Retains the use of your stock liquid to liquid oil cooler unit
- Billet aluminum thermostatic oil sandwich plate

Mounting on the front passenger side of your engine bay, this aftermarket kit ensures you’re getting maximum airflow for cooling while not interfering with any potential, aftermarket air intake systems.

This kit begins with a 19-row cooler and utilizes application-specific braided stainless steel lines to transfer the oil from the cooler to the engine. These steel lines feature -10AN fittings for an easy installation. Once installed you can expect consistent temperature decreases of over 30°F (16.7°C) using the included thermostatic sandwich plate.

Specifications:
- Material: 6061 Aluminum
- Core Height: 5.43”
- Rows: 19
- Cooler Construction: Stacked-plate
- Core Thickness: 1.97”
- Core Length: 11”
- Fitting Size: -10AN
- Pressure Drop: 3-5 PSI
- Temp Difference: 30°F
- Increase In Oil Capacity: 0.65 qt

This Kit Includes:
- Mounting Brackets and Spacer
- 19-Row Oil Sleek Silver Cooler
- 3’, 8” Stainless Steel Braided Hose with Straight and 90 Degree -10AN Fittings
- 2', 11" Stainless Steel Braided Hose with 45 Degree and 90 Degree -10AN Fittings
- Thermostatic Sandwich Plate
- 3/4" x 16" Stainless Steel Sandwich Plate Adapter
- M20 x -10AN Straight Fittings
- Mounting Hardware Set

Please Note: This kit is designed to work by removing the active grill shutters to obtain maximum airflow to the oil cooler. This oil cooler kit retains the use of your stock liquid to liquid oil cooler unit.

Tech Tip: Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.

Attention: It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.