MRT Sport Touring Cat Back Exhaust System with 4" Polished Tips Mustang SVT Cobra 1999-2004

MRT:
92B502

Highlights

  • Mandrel Bent 2.5" Tubes
  • Do It Yourself Installation
  • Polished Exhaust Tips
  • Made in the USA
MSRP $1,439.99
$1,199.99
You save 17%
Earn
points.
Product Description

MRT Sport Touring Cat Back Exhaust System with 4" Polished Tips for all 1999, 2001, 2002, 2003 and 2004 SVT Cobra Mustangs.

This MRT Cat Back Exhaust System (92B502) is designed to improve sound, looks, and performance on your SVT Cobra Mustang. Offering a throaty bellow out of 2-1/2 mandrel bent tubes, this kit features straight through mufflers and 4" polished tips. Drone is comfortable and hardly noticeable. Wide open throttle increases loudness, but cruising remains pleasant.

Features and Benefits:
- Aggressive, Deep Muscle Car Sound
- Wide Open Throttle Increases Exhaust Loudness and Tone
- Straight-through Design to Provide Maximum Exhaust Gas Flow
- Large 2.5" Piping is Used for Reduced Exhaust Restrictions
- Reducing Restriction and Maximizing Flow Provide for Noticeable Gains
- 4" Double Wall, Polished T304 Stainless Steel Dual tips with beveled edges
- Simple Do-It-Yourself Installation
- Includes All Necessary Hardware
- No Tune Required
- Made in the USA

This Kit Includes:
- Two (2) Exhaust Tips
- Two (2) 2-1/2” Band Clamps
- Two (2) Under Axle Pipes
- Two (2) MRT High Flow Mufflers
- Four (4) 2-1/2” Muffler Clamps
- Four (2) Flow Tubes
- Two (2) Flanges
- Two (4) Bolts
- Eight (8) Washers
- Four (4) Nuts

Vehicle Fitment:
- 1999-2004 SVT Cobra Mustangs
*Does NOT fit 2000 SVT Cobra R models.

Please Note:
- This system is NOT designed for use with V6, GT, Bullitt or Mach 1 Mustangs equipped with a solid rear-axle.
- MRT does NOT recommend the use of an impact gun on band clamps, as overtightening can result in damaged clamps. The torque specifications for the included clamps are 30 ft/lbs. to 35 ft/lbs.

Tech Tip:
- Initial operation after installation will heat-cycle the tubing, causing expansion and contraction. Because of this, MRT suggests that you check all clamps and re-tighten if necessary after approximately 30 miles of driving.

California Residents: Proposition 65 Warning

Related Categories: Mustang Parts, Mustang Exhaust, Mustang Cat Back Exhaust Kits

Installation & Fitment

Installation Difficulty

Moderate
Moderate

Intermediate skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

Questions & Answers
Only registered users can ask/answer questions. Please sign in or create an account.
Reviews
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account