Parking Light LED 1965-1966

CJ's Part Number:
97% of 100


  • Led Parking Light
  • Easy Installation
  • Sold Individually
  • Factory Bulb Socket
MSRP $47.29
You save 22%

LED Parking Light for all 1965-1966 Mustangs.

For a safer alternative to traditional parking light bulbs, you should check out this LED Parking Light for your 1965-1966 Mustang. LED light bulbs are brighter than incandescent bulbs, they last much longer and they don't give off any heat either.

Features and Benefits:
- Easy Installation
- Individually Sold
- Longer Lasting Bulb
- Doesn’t Give off Heat
- Brighter than Standard Bulbs

Updating the lighting in classic Mustangs is becoming a popular restomod as more and more Pony lovers realize how many benefits LED light bulbs offer over traditional bulbs. These lights will not melt the lens or casing of your parking lights, and you will not have to worry about changing the bulb any time soon because LED lights can last decades!

Installing your new LED Parking Light is incredibly easy. Simply remove the screws that hold the lens to the housing and install your new LED bulb into the factory bulb socket.

Please Note: This LED Parking Light is sold individually.

Whether you just need to mend a broken taillight and be done with it, or you are building a completely new lighting system, CJ Pony Parts is the place to come when you want to see and be seen.

Order an LED Parking Light for your 1965-1966 Mustang from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

If you've been following along on our Weekend Wrench project car, you've seen we've done several upgrades to modernize our Mustang. One area where classic Mustangs really could use an upgrade is in the lighting system, so today we're going to show you how to install a set of these LED parking lights. The LED parking lights are going to screw into your factor retainers and plug right into the factory bulb socket. They feature 48 LEDs so it'll be far brighter than the factory bulbs.

Installing the LEDs is pretty much as simple as replacing the light bulb in the parking light. We start by removing the screws that hold the lens to the housing. We're going to pop out our lens and twist and turn to pull our original bulb out. The LED is going to install in the factory bulb socket. Since there's no bulb to hold on, it can be hard to push in and turn. There's a slot right between the wires. Put a small flat head screwdriver in and use that to install it. We want to make sure the wires are rolled up so their centered and we're going to reinstall the screws to hold the lens. Now we're going to test our lights.

The LED parking lights are a simple upgrade that looks great on the front of our '65 Mustang. Installation will only take you a few minutes per side so you'll be back on the road in no time.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account