Pro-Fit T-5 Conversion Kit Mustang 289/ 302/ 351W/ 351C 65-66 w/ Hydraulic Clutch

Imbue your 1965-1966 Mustang with modern performance using this Pro-Fit T-5 conversion kit. This kit introduces the smooth operation of the TREMEC T-5 transmission to 289, 302, 351W, and 351C engines. Enjoy next-level fuel economy thanks to the 0.63:1 overdrive gear while retaining natural-feeling shifts. Drivers also get the benefit of a hydraulic clutch system, making clutch engagement feel better than ever.

Features and Benefits:
- Complete TREMEC T-5 transmission kit for simplified conversion
- Perfect for Mustangs without extensive modifications
- 300 lbs/ft torque capacity is perfect for moderate horsepower builds
- Weighs only 75 lbs dry for extremely light feel
- 0.63:1 overdrive gear creates superior fuel economy
- Shifter has internal rail design & 1:1 ratio for natural feel
- Shifter is forward-adjusted up to 7” for bench seat clearance
- 157-tooth, billet steel flywheel has 28.2-oz balance & meets SFI 1.1 standards
- Includes hydraulic clutch system with master cylinder for effortless engagement

Kit Includes:
- TREMEC T-5 five-speed transmission
- Bolt-in X Factor Crossmember
- Polyurethane transmission mount
- Pilot bearing & reverse light harness
- Speedometer conversion
- White Lightning shifter knob
- ARP Pro-Series 12-point flywheel bolt kit
- Bellhousing for SBF engines to T5 trans
- SPEC Stage 1 clutch kit
- Bolt & dowel kit for 10.5” pressure plate
- 5 speed conversion separator plate
- T-5 conversion shifter lever
- 20, 23, & 18-tooth speedo gears
- Under-dash hydraulic clutch pedal conversion kit
- Master cylinder & billet reservoir kit
- All necessary hardware

Please Note: The flywheel is designed for use with 10.5” diaphragm clutches.