Project RST Spoiler Front Cup Kit Focus ST 2013-2014
Highlights
- Quality Urethane Construction
- Eliminates The "Reverse Rake"
- Includes Mounting Hardware
- Easy Installation
Project RST Front Cup Spoiler Kit for 2013-2014 Focus STs.
Project RST crafted the Front Cup Spoiler Kit 99-0387 to be customizable for a perfect match to your 2013-2014 Focus ST’s front bumper. The durable and dependable Front Cup Spoiler is an OE-quality urethane construction that effectively extends your front bumper to equal the same depth as the factory side skirts. Made in the USA, you can count on the long-lasting quality of all components found in this complete kit, including the necessary hardware.
Features and Benefits:
- Durable OE-Style Urethane
- Accentuates Front Bumper
- Eliminates "Reverse Rake"
- Hassle-Free Priming, Painting and Installation
- Hardware Included
- Made in the USA
Project RST's Front Cup Spoiler Kit is an exterior modification that enhances the front of your 2013-2014 Focus ST. Transform the trademark original look of the Focus ST's front bumper with this aggressive Project ST Focus "TrackSTer," originally seen at the 2013 Chicago Auto Show. This spoiler kit comes with an unpainted and nearly-ready front spoiler that will mount in the factory location and maintain the factory driving lights and grilles.
Tech Tip: This Kit is also available for the 2014-2019 Fiesta ST, please see P/N: PRSTCUP1.
Project RST is the result of a passion by fifteen52 co-owners, Brad Beardow and Matt Crooke, for Ford's ST and RS generations of performance vehicles. Originally a 2012 marketing partnership with world-renowned WRC and Gymkhana driver, Ken Block, and Ford Performance, over time the Project RST concept has morphed into what you see here: offering a growing selection of quality products we feel further enhances the already awesome styling of the Ford vehicles we love so much.
California Residents: Proposition 65 Warning
Installation Videos
Video Transcript
We're going to put a few pieces of the supplied double- stick tape pretty much along this groove here, a piece across here, another piece here, and 1 going up this way. Before I do that, we'll give this surface just a quick clean off with some alcohol. You need to remove the factory T30 Torx Bit located here, and you're going to replace it with the included one, which is longer to fit the new cup spoilers. We'll also clean the surface of the car with some rubbing alcohol, just where the tape's going to go. Remove the backing from the double-stick tape. We're going to start with the back corner. Make sure you pull it away from the body until you get it up into place, and then push down on the tape. Now, we'll install the supplied screw back in the factory location. Repeat the process on the other side, and installation's finished.
